It is stated that the aerodynamic forces on the vehicle being aerocaptured are controlled by "altering the angle of attack" and thereby controlling the lift coefficient. Furthermore, the resulting variation of drag coefficient with angle of attack was ignored. The purpose of this Comment is to point out that an aerodynamic control method that is much more effective than the pitch modulation has been studied and utilized during entries for many years. During aerocapture, it is desirable to have a large range of lift coefficients available, while keeping the vehicle's ballistic coefficients constant. This is accomplished by modulating the vehicle's bank angle, i.e., by rolling the vehicle about its velocity vector. By this method, the angle of attack can be held constant (at the trim angle, if desired), and the C(sub D) and the ballistic coefficient remain constant. Furthermore, the vertical component of the normal force vector (essentially the lift) can be varied over its entire range, from maximum positive to maximum negative values. Reaction controls, rather than aerodynamic ones, are usually utilized to change the bank angle of the vehicle, thus requiring the use of fuel. However, the fuel expenditure that is required to change the bank angle is far less than the amount that would have to be used to continuously hold the vehicle at pitch angles that differ significantly from its trim angle of attack. Also, it has been shown that bank angle modulation to vary the lift can enlarge the entry corridor by increasing the entry angle for the undershoot boundary, where both the heating rate and deceleration reach a maximum. Finally, the crew's deceleration tolerance can be increased somewhat when the bank angle is varied, as opposed to the pitch angle. For bank modulation, the deceleration force vector can be kept at a constant angle with respect to the occupants whose tolerance to g loads is highest when the force is applied in a direction normal to the upper torso. The advantages of bank angle variation to modulate the lift vector were recognized long ago, and this method of control was used successfully on the Apollo command module during lunar return' and, more recently, for the Space Shuttle Orbiter.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Comment on 'Guidance for an Aerocapture Maneuver


    Contributors:


    Publication date :

    1994-08-01


    Type of media :

    Miscellaneous


    Type of material :

    No indication


    Language :

    English


    Keywords :


    Comment on 'Guidance for an aerocapture maneuver'

    Gaudreault, Michele L. D. / Liebst, Brad S. / Bagley, Ronald L. | AIAA | 1994


    Guidance for an aerocapture maneuver

    GURLEY, J. G. | AIAA | 1993


    Guidance for an Aerocapture Maneuver

    Gurley, J.G. | Online Contents | 1993


    Optimal Guidance for Mars Aerocapture Maneuver

    Machado, Larissa Balestrero / Wilde, Markus / Kaplinger, Brian et al. | TIBKAT | 2019


    Optimal Aerocapture Guidance

    Ping Lu | Online Contents | 2015