Rolling Maneuver Load Alleviation (RMLA) was demonstrated on the Active Flexible Wing (AFW) wind tunnel model in the LaRC Transonic Dynamics Tunnel. The design objective was to develop a systematic approach for developing active control laws to alleviate wing incremental loads during roll maneuvers. Using linear load models for the AFW wind-tunnel model which were based on experimental measurements, two RMLA control laws were developed based on a single-degree-of-freedom roll model. The RMLA control laws utilized actuation of outboard control surface pairs to counteract incremental loads generated during rolling maneuvers and roll performance. To evaluate the RMLA control laws, roll maneuvers were performed in the wind tunnel at dynamic pressures of 150, 200, and 250 psf and Mach numbers of .33, .38, and .44, respectively. Loads obtained during these maneuvers were compared to baseline maneuver loads. For both RMLA controllers, the incremental torsion moments were reduced by up to 60 percent at all dynamic pressures and performance times. Results for bending moment load reductions during roll maneuvers varied. In addition, in a multiple function test, RMLA and flutter suppression system control laws were operated simultaneously during roll maneuvers at dynamic pressures 11 percent above the open-loop flutter dynamic pressure.
Rolling maneuver load alleviation using active controls
AIAA Dynamics Specialists'' Conference ; 1992 ; Dallas, TX, United States
1992-07-01
Conference paper
No indication
English
Rolling Maneuver Load Alleviation Using Active Controls
NTIS | 1992
|Rolling Maneuver Load Alleviation using active controls
AIAA | 1992
|Rolling Maneuver Load Alleviation Using Active Controls
Online Contents | 1995
|Rolling Maneuver Load Alleviation using active controls
NTRS | 1992
|Rolling maneuver load alleviation using active controls
AIAA | 1995
|