The evaluation of the performance of any propulsion device requires the accurate measurement of thrust. While chemical rocket thrust is typically measured using a load cell, the low thrust levels associated with electric propulsion (EP) systems necessitate the use of much more sensitive measurement techniques. The design and development of electric propulsion thrust stands that employ a conventional hanging pendulum arm connected to a balance mechanism consisting of a secondary arm and variable linkage have been reported in recent publications by Polzin et al. These works focused on performing steady-state thrust measurements and employed a static analysis of the thrust stand response. In the present work, we present a calibration method and data that will permit pulsed thrust measurements using the Variable Amplitude Hanging Pendulum with Extended Range (VAHPER) thrust stand. Pulsed thrust measurements are challenging in general because the pulsed thrust (impulse bit) occurs over a short timescale (typically 1 micros to 1 millisecond) and cannot be resolved directly. Consequently, the imparted impulse bit must be inferred through observation of the change in thrust stand motion effected by the pulse. Pulsed thrust measurements have typically only consisted of single-shot operation. In the present work, we discuss repetition-rate pulsed thruster operation and describe a method to perform these measurements. The thrust stand response can be modeled as a spring-mass-damper system with a repetitive delta forcing function to represent the impulsive action of the thruster.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Pulsed Electric Propulsion Thrust Stand Calibration Method


    Contributors:
    A. R. Wong (author) / A. Polzin (author) / J. Boise Pearson (author)

    Publication date :

    2011


    Size :

    2 pages


    Type of media :

    Report


    Type of material :

    No indication


    Language :

    English




    Pulsed Electric Propulsion Thrust Stand Calibration Method

    Wong, Andrea R. / Polzin, Kurt A. / Pearson, J. Boise | NTRS | 2011


    Non-contact thrust stand calibration method for repetitively-pulsed electric thrusters

    Wong, Andrea / Toftul, Alexandra / Polzin, Kurt et al. | AIAA | 2011


    Thrust Stand for Electric Propulsion Performance Evaluation

    Markusic, T. E. / Jones, J. E. / Cox, M. D. | NTRS | 2004


    Thrust Stand for Electric Propulsion Performance Evaluation

    Markusic, Thomas / Jones, Jonathon / Cox, M. | AIAA | 2004


    Thrust Stand for Electric Propulsion Performance Evaluation

    T. E. Markusic / J. E. Jones / M. D. Cox | NTIS | 2004