Oak Ridge National Laboratory (ORNL) has developed and patented methods to weigh slowly moving vehicles. We have used this technology to produce a portable weigh-in-motion system that is robust and accurate. This report documents the performance of the second-generation portable weigh-in-motion prototype (WIM Gen II). The results of three modes of weight determination are compared in this report: WIM Gen II dynamic mode, WIM Gen II stop-and-go mode, and static (parked) mode on in-ground, static scales. The WIM dynamic mode measures axle weights as the vehicle passes over the system at speeds of 3 to 7 miles per hour (1.3 to 3.1 meters/second). The WIM stop-and-go mode measures the weight of each axle of the vehicle as the axles are successively positioned on a side-by-side pair of WIM measurement pads. In both measurement modes the center of balance (CB) and the total weight are obtained by a straight-forward calculation from axle weights and axle spacings. The performance metric is measurement error (in percent), which is defined as 100 x (sample standard deviation)/(average); see Appendix A for details. We have insufficient data to show that this metric is predictive. This report details the results of weight measurements performed in May 2005 at two sites using different types of vehicles at each site. In addition to the weight measurements, the testing enabled refinements to the test methodology and facilitated an assessment of the influence of vehicle speed on the dynamic-mode measurements. The initial test at the National Transportation Research Center in Knoxville, TN, involved measurements of passenger and light-duty commercial vehicles. A subsequent test at the Arrival/Departure Airfield Control Group (A/DACG) facility in Ft. Bragg, NC, involved military vehicles with gross weights between 3,000 and 75,000 pounds (1,356 to 33,900 kilograms) with a 20,000-pound (9,040 kilograms) limit per axle. For each vehicle, four or more separate measurements were done using each weighing mode. WIM dynamic, WIM stop-and-go, and static-mode scale measurements were compared for total vehicle weight and the weight of the individual axles.
Prototype Weigh-In-Motion Performance
2006
47 pages
Report
No indication
English
Wiley | 2009
|Weigh-in-Motion Instrumentation
NTIS | 1978
|Wiley | 2009
|Australian weigh-in-motion technology
Online Contents | 1995
|Fatigue Performance of Piezoelectric Weigh-in-Motion Sensors
Transportation Research Record | 2001
|