Oregon Inlet is a large tidal inlet through the barrier island system of North Carolina. In 1970, Congress authorized the Manteo (Shallowbag) Bay project which had provisions to stabilize Oregon Inlet with two jetties, deepen the ocean bar channel to 20 ft, and bypass across the inlet sand intercepted by the jetties. This report describes the results of a numerical study to consider coastal and inlet processes in the region surrounding the inlet under existing and planned project conditions. To accomplish the objectives of the study, a system of numerical models called Coastal and Inlet Processes (CIP) Numerical Modeling System was developed. It included models for wave propagation, wave-induced currents and setup, sediment transport within and beyond the surf zone, and profile response (onshore-offshore transport). Results from a separate study on numerical simulation of tides and storm surge for Oregon Inlet were utilized in the present investigation. As a test for an extreme event, the Ash Wednesday storm of March 1962 was simulated with the profile response model. There was good agreement between the calculated erosion amounts of the shore-normal profiles for Bodie and Pea Islands (on either side of Oregon Inlet) and values measured in the field. As an alternative to the stabilization of the entrance channel by construction of two jetties, a nonstructural solution proposed by the Department of the Interior was evaluated using the profile response model. The solution involved disposal of the dredged material from the entrance channel in the nearshore region with the idea that the material would be dispersed shoreward by wave action at a rate sufficient to prevent dredging-induced beach erosion. The results of the model indicated that on the average only 25 percent of the disposed material migrated toward the shore in a year. This migration was insufficient to prevent dredging-induced beach erosion. In order to perform an ocean bar channel dredging analysis, the US Army Engineer District, Wilmington (SAW), needed to know the period of time that dredges of the CURRITUCK and ATCHAFALAYA/MERMENTAU classes could operate in the entrance channel under the influence of waves. To study this problem, the wave propagation model was run allowing for wave-current interactions. Using the model results, SAW determined the limiting wave heights for dredging operations to be deepwater significant heights of 3.0 and 4.0 ft, respectively, for the two classes of dredges. The CIP system was used to study the erosion and accretion in the entrance channel as well as the lateral movement of the channel in the presence of the south jetty alone, simulating a construction sequence in which the south jetty was built before the north jetty. To accomplish this the longshore sediment transport model simulated an average year's wave climate and tide, using the results of the wave, wave-induced current, and tide models. The results of the simulation showed that during the year a total of 1,055,990 cu yd of material was trapped in the entrance channel, whereas a total of 660,000 cu yd of material was eroded between the southern boundary of the channel and the south jetty. It was determined that the entrance channel could move on the average about 150 ft per year toward the south jetty.


    Access

    Download


    Export, share and cite



    Title :

    Coastal and Inlet Processes Numerical Modeling System for Oregon Inlet, North Carolina



    Published in:

    Technical Report ; TR-CERC-85-6


    Publication date :

    1985


    Size :

    17213113


    Type of media :

    Report


    Type of material :

    Electronic Resource


    Language :

    English



    Classification :


    Sloping Float Breakwater Study, Oregon Inlet, North Carolina: Coastal Model Investigation

    Carver, Robert D. / Markle, Dennis G. / Dubose, Willie G. et al. | HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1987

    Free access

    Jetty Stability Study, Oregon Inlet, North Carolina: Hydraulic Model Investigation

    Carver, Robert D. / Davidson, D. Donald | HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1983

    Free access

    Functional Design of Control Structures for Oregon Inlet, North Carolina: Hydraulic Model Investigation

    Hollyfield, Noel W. / McCoy, James Wesley / Seabergh, William C. | HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1983

    Free access

    Coastal Response to Navigation Structures at Murrells Inlet, South Carolina

    Douglass, Scott L. | HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1987

    Free access

    Coastal Response to a Dual Jetty System at Little River Inlet, North and South Carolina

    Chasten, Monica A. | HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1992

    Free access