Abstract During the last 40 years, the mass of the artificial objects in orbit increased quite steadily at the rate of about 145 metric tons annually, leading to a total tally of approximately 7000 metric tons. Now, most of the cross-sectional area and mass (97% in LEO) is concentrated in about 4600 intact objects, i.e. abandoned spacecraft and rocket bodies, plus a further 1000 operational spacecraft. Simulations and parametric analyses have shown that the most efficient and effective way to prevent the outbreak of a long-term exponential growth of the catalogued debris population would be to remove enough cross-sectional area and mass from densely populated orbits. In practice, according to the most recent NASA results, the active yearly removal of approximately 0.1% of the abandoned intact objects would be sufficient to stabilize the catalogued debris in low Earth orbit, together with the worldwide adoption of mitigation measures. The candidate targets for removal would have typical masses between 500 and 1000kg, in the case of spacecraft, and of more than 1000kg, in the case of rocket upper stages. Current data suggest that optimal active debris removal missions should be carried out in a few critical altitude–inclination bands. This paper deals with the feasibility study of a mission in which the debris is removed by using a hybrid propulsion module as propulsion unit. Specifically, the engine is transferred from a servicing platform to the debris target by a robotic arm so to perform a controlled disposal. Hybrid rocket technology for de-orbiting applications is considered a valuable option due to high specific impulse, intrinsic safety, thrust throttle ability, low environmental impact and reduced operating costs. Typically, in hybrid rockets a gaseous or liquid oxidizer is injected into the combustion chamber along the axial direction to burn a solid fuel. However, the use of tangential injection on a solid grain Pancake Geometry allows for more compact design of the propulsion unit. Only explorative tests were performed in the past on this rocket configuration, which appears to be suitable as de-orbiting system of new satellites as well as for direct application on large debris in the framework of a mission for debris removal. The paper describes some critical aspects of the mission with particular concern to the target selection, the hybrid propulsion module, the operations as well as the systems needed to rendezvous and dock with the target, and the disposal strategy.

    Highlights Identification of large abandoned objects in orbit. Selection of possible candidates for demonstrative active removal mission. Definition of rendezvous and de-orbiting strategies for a large abandoned object. Electro-adhesion technology for the mating of a large non-cooperative debris. Preliminary sizing of a hybrid propulsion module for removal.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Active space debris removal by a hybrid propulsion module


    Contributors:
    DeLuca, L.T. (author) / Bernelli, F. (author) / Maggi, F. (author) / Tadini, P. (author) / Pardini, C. (author) / Anselmo, L. (author) / Grassi, M. (author) / Pavarin, D. (author) / Francesconi, A. (author) / Branz, F. (author)

    Published in:

    Acta Astronautica ; 91 ; 20-33


    Publication date :

    2013-04-16


    Size :

    14 pages




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    English





    Active debris multi-removal mission concept based on hybrid propulsion

    Tadini, P. / Tancredi, U. / Grassi, M. et al. | Elsevier | 2014



    Comparison of Chemical Propulsion Solutions for Large Space Debris Active Removal

    Tadini, Pietro / Tancredi, Urbano / Grassi, Michele et al. | Springer Verlag | 2016


    Active Removal of Large Debris: Electrical Propulsion Capabilities

    Soccodato, C.B. / Lorand, A. / Perrin, V. | British Library Conference Proceedings | 2013