Purpose. The main purpose of this work is to present the results of determining the strength of a container with sandwich panel walls under the main operating modes of loading. Methodology. To ensure the strength of the bearing structure of the container, it is proposed to make its end and side walls from sandwich panels. This involves the creation of sandwich panels from two metal sheets, between which there is a filler in the form of an energy-absorbing material. The thickness of the sandwich panel sheets is determined by the Bubnov-Galerkin method. The sheet is considered as a thin-walled plate with the corresponding width and height parameters. To determine the strength of the load-bearing structure of a container with sandwich panel walls, the corresponding calculations were performed using the finite element method in the SolidWorks Simulation software package. The Mises criterion (IV theory of strength) was used as a calculation criterion. The spatial model of the container was created in SolidWorks. Findings. Taking into account the calculations, the rational thickness of the sheets, in terms of strength, of the side and end walls was established, which was 1.6 and about 3.0 mm, respectively. It is important that the use of rectangular corrugations makes it possible to reduce the thickness of the end wall sheet to 1.0 mm. The thickness of the side wall sheet is the same. The maximum stresses in the container in the case of its longitudinal loading occur in the fittings and amount to 268.3 MPa, which is 13.6 % lower than the permissible ones. The maximum stresses in the container under transverse loading were recorded in the areas of interaction between the side wall and the corner posts. The numerical value of these stresses was 178 MPa, which is 15.2 % lower than the permissible ones. Originality. The paper scientifically substantiates the use of sandwich panels as the walls of a uni-versal container. Practical value. The research will contribute to the creation of recommendations for the design of modern modular-type vehicle structures and improve the efficiency of the transport industry.


    Access

    Download


    Export, share and cite



    Title :

    Determination of the Strength of a Container with Sandwich Panel Walls under Operational Loading Conditions


    Contributors:


    Publication date :

    2024




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    Unknown





    Determination of multiaxial tire deformations under well defined operational loading conditions

    Rupp, A. / Grubisic, V. / VDI; Gesellschaft Fahrzeug- und Verkehrstechnik (VDI-FVT) | British Library Conference Proceedings | 1997


    Nano-Modified Sandwich Composites Under Dynamic Loading Conditions

    Avila, A. / Andrade, M. / Cruz, D. et al. | British Library Conference Proceedings | 2009


    Nano-Modified Sandwich Composites Under Dynamic Loading Conditions

    Avila, Antonio / Andrade, Moises / Cruz, Diego et al. | AIAA | 2009


    Determination of the transverse load of the box wagon body with sandwich panel walls

    Panchenko, Sergii / Gerlici, Juraj / Lovska, Alyona et al. | American Institute of Physics | 2024