According to the repair demand of aircraft 30CrMnSiA high-strength steel pull rod, the laser cladding process research and pull rod repair were carried out using gas atomized 30CrMnSiA powder as cladding material. The effects of different process parameters on forming quality were compared. The microstructure, mechanical properties and wear resistance of the cladding area under the optimal laser process were studied, and the damaged part of the pull rod was repaired by this process and dimensional measurement was carried out. The results show that using the optimal laser cladding process, the cladding layer with good metallurgical bonding with the base metal and dense microstructure can be obtained. The cladding layer is composed of columnar or honeycomb shaped ferrite and surrounding martensite. The microhardness of the cladding layer is about 475HV, about 36% higher than that of the base metal, and the average tensile strength of the joint is about 9% higher than that of the base metal. Compared with forged 30CrMnSiA steel, the depth of wear track of the cladding layer is reduced by 27.7%, and the width of wear track is also reduced by 35.2%, which means better wear resistance. By using this process, a repaired pull rod with good cladding quality, satisfactory dimensional accuracy and basically no thermal deformation is obtained, so the qualified products are delivered.


    Access

    Download


    Export, share and cite



    Title :

    Repair of 30CrMnSiA high strength steel pull rod by laser cladding


    Contributors:
    LIU Wei (author) / YAN Taiqi (author) / SUN Bingbing (author) / CHEN Bingqing (author) / ZHANG Feng (author) / PANG Yibin (author)


    Publication date :

    2022




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    Unknown




    Tip repair of compressor airfoils by laser powder cladding

    Stimper, B. / Deutscher Verband fur Schwei≬en und Verwandte Verfahren / Bundesverband der Deutschen Luft- und Raumfahrtindustrie | British Library Conference Proceedings | 2000


    Laser Cladding for Railway Repair and Preventative Maintenance (501)

    Clare, A. / Olusola, O. / Folkes, J. et al. | British Library Conference Proceedings | 2011


    Effects of Ti-1023 Anodized Coating on Corrosion Behavior of Ti-1023/30CrMnSiA and Ti-1023/LY12 Galvanic Couples

    Liu, J. H. / Shi, J. X. / Li, S. M. et al. | British Library Conference Proceedings | 2007


    Assessment of Laser Cladding as an Option for Repair of Rails

    Lewis, S.R. / Lewis, R. / Fletcher, D.I. | Tema Archive | 2012