In order to reduce automotive development investments in cost and time for integration, calibration and validation of electric powertrains, particular development tasks are rescheduled to earlier program phases which is usually referred to as frontloading. For frontloading, prototype vehicle tests are shifted to component test benches (road2rig approach). For multiple validation tasks it is crucial that the device under test e.g. an electric drive is tested considering all interactions with neighboring vehicle components. In this contribution, a hardware-in-the-loop methodology is presented with focus on how these interactions can be replicated at component test benches with closed-loop real-time simulations and how electric drives can be calibrated and validated within a virtual vehicle. The hardware-in-the-loop setup is described as cascaded control system considering a multiple input multiple output system. Thereto, the mathematical equations of the multiple input multiple output systems are derived and the cross couplings are analyzed. Due to this analysis, the inner control circuits are set up as decentralized control, which is calibrated considering stability and high dynamics. For the outer control circuits, the simulation models of a battery electric vehicle are developed based on particular measurement data. The device under test consists of an electric drive with a permanent magnet synchronous machine and an inverter. The electric drive is set up at a laboratory test bench and connected with the simulation models to a hardware-in-the-loop setup. The hardware-in-the-loop setup is analyzed considering reproducibility and successfully validated by means of vehicle measurements performed on a chassis dynamometer. Thereafter, parameter variations are conducted for a high load test cycle (Nürburgring Nordschleife) as well as for the Worldwide Harmonized Light Vehicle Test Cycle (WLTC). Based on these parameter variations the significant influence of the interactions between the electric drive and the simulated vehicle components on the driving performance are demonstrated. Finally, an exemplary feasibility study for frontloading of the calibration of electric drives is conducted. Thereto, the driving functions for thermal derating, recuperation and a virtual high voltage dc-dc converter are optimized in terms of available power and energy efficiency as well as successfully validated. These use cases demonstrate the potential of hardware-in-the-loop setups in order to test and optimize electric drives in interaction with the entire vehicle in early phases of automotive development programs.


    Access

    Download

    Check availability in my library


    Export, share and cite



    Title :

    Hardware-in-the-Loop-Tests von elektrischen Fahrzeugantrieben


    Additional title:

    Hardware-in-the-loop tests of electric traction drives


    Contributors:

    Publication date :

    2022-01-01


    Size :

    1 Online-Ressource : Illustrationen pages


    Remarks:

    Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2022; Aachen : RWTH Aachen University 1 Online-Ressource : Illustrationen (2022). = Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2022



    Type of media :

    Miscellaneous


    Type of material :

    Electronic Resource


    Language :

    German




    Hardware-in-the-Loop-Tests von elektrischen Fahrzeugantrieben

    Etzold, Konstantin | TIBKAT | 2022

    Free access


    Energetische Modellierung und Echtzeitsimulation von elektrischen Fahrzeugantrieben

    Thanheiser, Andreas Bernd / Technische Universität München | TIBKAT | 2015


    Transversalflussmaschinen in Fahrzeugantrieben

    Lange,A. / Voith,Heidenheim,DE | Automotive engineering | 2002


    Verlustermittlung in Fahrzeugantrieben

    Inderwisch, Kathrien | TIBKAT | 2015