This paper describes the development of autodepth control using a flexible ballast tank system for underwater Remote Operated Vehicle (ROV) that is commonly used in underwater application, such as monitoring, surveying and researching activities. Since the ROV design must be able to submerge and emerge, buoyancy control is needed. However, it is difficult to get the ROV to maintain at a constant depth for it to perform a desired task using the thruster system. This is because the power consumptions and saturated at certain depths depend closely on the design of thruster for the ROV. Thus, the ROV needs to have an auto depth control to maintain their depth so that all activities such as collecting data, monitoring and surveying at a constant specific depth can be carried out with minimum power consumption. This research attempts to design an auto depth control using a flexible ballast tank system for the ROV equipped with a pressure sensor as a depth sensor. The flexible ballast tank system is based on the principle of the pump that adopts the inlet or outlet water inside the tank by controlling the polarity of the pump regulated by a relay that acts like a switch. The switch is used to control the flow of current and activate the coil when it is triggered. The pressure sensor from a model MPX4250GP has been used and it functions as the depth sensors that send signal to PIC to execute the function of relay for controlling the pump’s polarity. In dealing with the controlling part, PIC is used as the microcontroller interface to program the relay function. There are two major phases in developing the auto depth system for the flexible ballast tanks: the hardware and software designs that consist of mechanical design and programming. The ROV will be tested in a laboratory pool to get the data that will be analyzed. This ROV is proven to be able to control the desired depth of 1 meter by controlling the flow of water inside the flexible ballast tank with minimized power consumptions.


    Access

    Download


    Export, share and cite



    Title :

    Auto Depth Control for Underwater Remotely Operated Vehicles Using a Flexible Ballast Tank System


    Contributors:
    Aras, M.S.M (author) / Abdullah, S.S (author) / Azis, F.A (author) / Zambri, M.K.M (author) / Basar, M.F (author)

    Publication date :

    2015-09-01


    Remarks:

    Journal of Telecommunication, Electronic and Computer Engineering (JTEC); Vol 7, No 1; 57-64 ; 2289-8131 ; 2180-1843


    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    English



    Classification :

    DDC:    629



    Remotely Operated Underwater Vehicles

    Billet, A. B. | SAE Technical Papers | 1984


    MODULE FOR UNDERWATER REMOTELY OPERATED VEHICLES

    SWANSON THOMAS ROBERT / PHAM HARRISON / SUN KATHY et al. | European Patent Office | 2024

    Free access


    Review on Auto-Depth Control System for an Unmanned Underwater Remotely Operated Vehicle (ROV) using Intelligent Controller

    Mohd Aras, Mohd Shahrieel / Abdullah, Shahrum Shah / Azis, F.A | BASE | 2015

    Free access