The deterioration of concrete structures, particularly highway bridges, has motivated the use of fiber-reinforced polymer (FRP) composites for retrofitting damaged components, typically using externally bonded carbon fabrics or laminates (CFRP). The application of this technology in practice has been highly successful, but there are concerns about its long-term performance and durability. Numerous studies have been devoted to the durability of concrete-FRP interface regarding bond evaluation and potential for delamination, but not much information is available on the effects of concrete substrate repair for deteriorated components, which is a necessary step before application of FRP reinforcement. This paper is part of a comprehensive rehabilitation program with CFRP of nearly 1,000 concrete T-beam bridges for the Pennsylvania Department of Transportation. The focus of this paper is on an exploratory study to evaluate the most effective concrete substrate repair method for damaged concrete beams by accelerated corrosion, subsequently reinforced for flexure with CFRP fabric and tested to failure. The contributions of this paper are, however, much broader, and provide valuable guidelines to design a comprehensive research program on this topic as well as sufficient practical recommendations for applications in practice, including (1)  an in-depth literature review with a useful summary reference table; (2) a prescription for producing porous, chloride-contaminated, and low-strength concrete, to simulate field conditions on the basis of microstructure evaluations of collected samples; (3) advice on proper implementation of accelerated corrosion to achieve consistency of results and, more importantly, to achieve damage characteristics resembling closely observed field conditions; and (4) evaluation of two widely used substrate repair methods: (a) polymer crack-injection and (b) replacement of concrete cover with polymer-modified concrete (PMC) containing corrosion inhibitor. The experimental program consisted of testing large-scale beams [15.2×20.3×274.3  cm (6×8×108  in.)] damaged by induced electric current. After repairing the concrete substrate, and subsequent bonding of the CFRP flexural reinforcement and shear anchors, the beams were subjected to a second cycle of accelerated corrosion and tested to failure under a 4-point bending load. The second-cycle corrosion-induced aging was used to indirectly evaluate long-term performance after CFRP retrofitting. The results showed that concrete cover replacement with PMC provided better load capacity and failure mode, indicating better long-term durability performance. This research is expected to contribute to guidelines for concrete patch repair of CFRP-retrofitted concrete bridge girders, to ensure better long-term performance under service loads and environmental effects.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Effect of Concrete Substrate Repair Methods for Beams Aged by Accelerated Corrosion and Strengthened with CFRP


    Contributors:

    Published in:

    Publication date :

    2011-04-01


    Size :

    13 pages




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    English



    Effect of Concrete Substrate Repair Methods for Beams Aged by Accelerated Corrosion and Strengthened with CFRP

    Ray, I. / Parish, G.C. / Davalos, J.F. et al. | British Library Conference Proceedings | 2011



    Experimental Study on Flexural Behavior of Damaged Reinforced Concrete Beams Strengthened with CFRP

    Jia, B. / Xue, J. / Mo, J. et al. | British Library Conference Proceedings | 2014


    Fracture Properties of Wide-notch Concrete Beams strengthened with Near-Surface Mounted CFRP Rebar

    Ren, Zhenhua / Zeng, Xiantao / Sun, Junbo et al. | Springer Verlag | 2019


    Fracture Properties of Wide-notch Concrete Beams strengthened with Near-Surface Mounted CFRP Rebar

    Ren, Zhenhua / Zeng, Xiantao / Sun, Junbo et al. | Online Contents | 2019