Tip leakage significantly affects the axial-compressor performance (i.e., its pressure ratio, peak efficiency, and surge margin). The size of the clearance is one of the most important parameters in compressor design. Generally, the tip clearance is uniform from the leading edge to the trailing edge of the compressor-blade section at the tip. In this paper, the effect of chordwise nonuniform tip clearance on the axial-compressor performance is investigated. In addition, the optimum distribution of clearance size is obtained by employing a surrogate model in conjunction with a multi-objective genetic algorithm for optimization. It is shown that the nonuniform tip clearance can effectively reduce the leakage mass-flow rate and eliminate the flow separation, thus enhancing the overall performance of the compressor. Based on the results of the sensitivity analysis, it is found that the changes in clearance size near the trailing edge of the blade tip contribute more toward the improvement of the compressor efficiency than those obtained by changing the clearance near the leading edge. The Pareto optimal front obtained by employing the multi-objective genetic algorithm shows that the transonic axial compressor with well-designed distributions of tip-clearance size gives 0.64% improvement in peak efficiency and 48.18% enhancement in surge margin.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Effect of Nonuniform Tip Clearance on the Performance of Transonic Axial Compressors


    Contributors:

    Published in:

    Publication date :

    2018-05-01




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    English




    Compliant Casing for Transonic Axial Compressors

    G. S. Bloch / C. Hah | NTIS | 2002


    Modeling Nonuniform Bleed in Axial Compressors

    Grimshaw, S. D | Online Contents | 2016


    A Compliant Casing for Transonic Axial Compressors

    Bloch, Gregory S. / Hah, Chunill | NTRS | 2003


    Control of tip clearance flows in axial compressors

    Bae, J. / Tan, C. / Breuer, K. | AIAA | 2000