1–50 von 68 Ergebnissen
|

    Anti-jamming pyromechanism for electromechanical actuators

    Naubert, Alexander / Christmann, Markus / Jänker, Peter et al. | Tema Archiv | 2013
    Schlagwörter: Design (Entwurf)

    Modelling cavitation mechanisms using large eddy simulation

    Lu, Nai-Xian | Tema Archiv | 2013
    Schlagwörter: Design (Entwurf)

    Inclusion of mass layers in hybrid acoustics dash insulators: Implications on acoustical performance and part design process

    Seppi, Marco / Bertolini, Claudio | Tema Archiv | 2013
    Schlagwörter: Design (Entwurf)

    Design of SCL structures in London

    Spyridis, Panagiotis / Nasekhian, Ali / Skalla, Gerald | Tema Archiv | 2013
    Schlagwörter: Design (Entwurf)

    Design and analysis of multifunctional structures with embedded electronics for thermomechanical loads

    Kothari, Rushabh / Sun, C.T. | Tema Archiv | 2012
    Schlagwörter: Design (Entwurf)

    Development of lightweight hydraulic components in innovative fibre composite design

    Hufenbach, Werner / Ulbricht, Andreas / Heims, Olaf et al. | Tema Archiv | 2012
    Schlagwörter: Design (Entwurf)

    A concept to design fleet compatible vehicles for real accident environments

    Qin, Yuxue | Tema Archiv | 2011
    Schlagwörter: Design (Entwurf)

    Neubau der Langen Brücke in Potsdam

    Klähne, Thomas / Einhäuser, Oliver / Ripke, Henry et al. | Tema Archiv | 2011
    Schlagwörter: Design (Entwurf)

    Nylon 66/polyester hybrid cords: 1. Design and investigation of properties

    Aytac, Ayse / Yilmaz, Berrin / Deniz, Veli | Tema Archiv | 2011
    Schlagwörter: Design (Entwurf)

    "Die Raupe" - eine bewegliche Brückenkonstruktion

    Kleiser, Michael / Foller, Gerald / Pommer, Herbert | Tema Archiv | 2011
    Schlagwörter: Design (Entwurf)

    Optimal design of a variable-twist proprotor incorporating shape memory alloy hybrid composites

    Park, Jae-Sang / Kim, Seong-Hwan / Jung, Sung Nam | Tema Archiv | 2011
    Schlagwörter: Design (Entwurf)

    Two steel bridges for the high speed railway line in Spain

    Sobrino, Juan A. | Tema Archiv | 2010
    Schlagwörter: Design (Entwurf)

    Influence evaluation of the factors totality upon the fatigue resistance of aerial wheels

    Agamirov, L.V. / Kramarenko, E.I. / Lisin, A.N. et al. | Tema Archiv | 2010
    Schlagwörter: Design (Entwurf)

    Erfahrungen mit Netzwerkbogenbrücken im Eisenbahnbrückenbau

    Gauthier, Peter / Krontal, Ludolf | Tema Archiv | 2010
    Schlagwörter: Design (Entwurf)

    Structural-acoustic design of a multi-functional sandwich panel in an automotive context

    Cameron, Christopher J. / Wennhage, Per / Göransson, Peter et al. | Tema Archiv | 2010
    Schlagwörter: Design (Entwurf)

    Design and execution of the strengthening of the Muiderbridge

    Mortier, H. / Kuilboer, C.P.M. / Dooren, F. van et al. | Tema Archiv | 2010
    Schlagwörter: Design (Entwurf)

    Gestalten von Eisenbahnbrücken

    Marx, Steffen / Schlaich, Jörg | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Das Zügelgurt-Fachwerk über die Mulde in Wurzen - eine Revision nach Entwurf und Ausführung

    Reintjes, Karl-Heinz | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Mechanical analysis and optimal design for carbon fiber resin composite wound hydrogen storage vessel with aluminum alloy liner

    Zheng, Chuanxiang / Lei, Shaohui | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Design, analysis and manufacturing of a CF-PEEK slat

    Keck, Rüdiger / Machunze, Wolfgang / Dudenhausen, Wolfgang | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Planung und Bau der Nord Stream-Pipeline durch die Ostsee

    Rott, Werner | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Implication of unequal rivet load distribution in the failures and damage tolerant design of metal and composite civil aircraft riveted lap joints

    Naarayan, S. Sathiya / Kumar, D.V.t.G. Pavan / Chandra, Satish | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Model based ground vibration tests

    Özkök, Burcak / Weltin, Uwe | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Structural optimisation of 3D damage tolerant components comparing the biological and genetic algorithm solutions

    Krishnapillai, K. / Jones, R. | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Neue Verbund-Schrägseilbrücken (BW 29 und 4) im Zuge der BAB 30 - Nordumgehung Bad Oeynhausen

    Frickel, Jörg / Schubart, Ralf / Hamme, Markus et al. | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Thermostructural design of a flying winglet experimental structure for the EXPERT re-entry test

    Ferraiuolo, M. / Riccio, A. / Gigliotti, M. et al. | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Modeling collapse aggressiveness of cavitation bubbles in hydromachinery

    Zima, Patrik / Sedlar, Milan / Müller, Milos | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    Optimal design of an aeroelastic wing structure with seamless control surfaces

    Perera, M. / Guo, S. | Tema Archiv | 2009
    Schlagwörter: Design (Entwurf)

    The evaluation of properties a car with plastic glazing

    Oh, Mee Hye / Yoon, Yeo Seong / Yang, Do-Hyeon et al. | Tema Archiv | 2008
    Schlagwörter: Design (Entwurf)

    Experimental investigation on the aerodynamic characteristics of a bio-mimetic flapping wing with macro-fiber composites

    Kim, Dae-Kwan / Kim, Hong-Il / Han, Jae-Hung et al. | Tema Archiv | 2008
    Schlagwörter: Design (Entwurf)

    Design and modeling of selective reinforcements for integral aircraft structures

    Boscolo, Marco / Allegri, Giuliano / Zhang, Xiang | Tema Archiv | 2008
    Schlagwörter: Design (Entwurf)

    Design, manufacturing and testing of a HALE-UAV structural demonstrator

    Frulla, G. / Cestino, E. | Tema Archiv | 2008
    Schlagwörter: Design (Entwurf)

    Design for recycling: a 'right' way

    Abraham, Fabrice | Tema Archiv | 2008
    Schlagwörter: Design (Entwurf)

    Innovative, low-cost manufacturing of a wing-box section

    Hattum, F.W.J. van / Labordus, M. / Tooren, M.J.L. van | Tema Archiv | 2008
    Schlagwörter: Design (Entwurf)

    Development of a new methodology to integrate ELV treatment limits into requirements for metal automotive part design

    Froelich, D. / Haoues, N. / Leroy, Y. et al. | Tema Archiv | 2007
    Schlagwörter: Design (Entwurf)

    Drawing out calculation of the hollow cylindrical necked products

    Vorontsov, A.L. | Tema Archiv | 2007
    Schlagwörter: Design (Entwurf)

    Future design scenario for composite airframe panels

    Degenhardt, Richard / Kling, Alexander / Rohwer, Klaus | Tema Archiv | 2006
    Schlagwörter: Design (Entwurf)

    Improvement in efficiency of dismantling plastic parts by using FEM

    Higashi, Hirokazu / Ito, Toshiyuki | Tema Archiv | 2006
    Schlagwörter: Design (Entwurf)

    Multi-disciplinary optimization of railway wheels

    Nielsen, J.C.O. / Fredö, C.R. | Tema Archiv | 2006
    Schlagwörter: Design (Entwurf)

    Tailored fibre placement optimization tool

    Temmen, Hubert / Degenhardt, Richard / Raible, Tilmann | Tema Archiv | 2006
    Schlagwörter: Design (Entwurf)

    Coupling techniques for computational nonlinear transient aeroelasticity

    Unger, Ralf / Haupt, Matthias C. / Horst, Peter | Tema Archiv | 2006
    Schlagwörter: Design (Entwurf)

    Development of a new design of safety tyre

    Yusupov, A.A. / Veselov, I.V. / Yurtsev, L.N. et al. | Tema Archiv | 2006
    Schlagwörter: Design (Entwurf)

    RTM composite lugs for high load transfer applications

    Wallin, Markus / Saarela, Olli / Law, Barnaby et al. | Tema Archiv | 2006
    Schlagwörter: Design (Entwurf)

    Corrosion modeling addresses sour operating conditions

    Rippon, Ian J. | Tema Archiv | 2005
    Schlagwörter: Design (Entwurf)

    Integration of acoustics and mechanics in a stiffened shell fuselage. Part III

    Krakers, L.A. / Van Tooren, M.J.L. / Zaal, K. et al. | Tema Archiv | 2005
    Schlagwörter: Design (Entwurf)

    Two simple design problems, which illustrate the multi-disciplinary concept. Part II

    De Jong, T. / Beukers, A. / Van Tooren, M.J.L. | Tema Archiv | 2005
    Schlagwörter: Design (Entwurf)

    Innovative mechanical fastening systems for new materials - today's situation and future perspectives

    Friedrich, C. / Hoffmann, U. / Bohlender, T. | Tema Archiv | 2005
    Schlagwörter: Design (Entwurf)

    A primer on jounce bumper design using microcellular polyurethane

    Dickson, D.G. | Tema Archiv | 2004
    Schlagwörter: Design (Entwurf)