Synonyme wurden verwendet für: Drucktechnik
Suche ohne Synonyme: keywords:("Drucktechnik")

1–50 von 312 Ergebnissen
|

    Conflict-free optimal motion planning for parallel aerial 3D printing using multiple UAVs

    Freier Zugriff
    Stamatopoulos, Marios-Nektarios / Banerjee, Avijit / Nikolakopoulos, George | BASE | 2024
    Schlagwörter: Aerial 3D printing , Parallel printing

    Designing aerodynamic devices for UAV – lessons learned

    Mieloszyk, Jacek / Tarnowski, Andrzej / Goetzendorf-Grabowski, Tomasz | Emerald Group Publishing | 2024
    Schlagwörter: 3D printing

    MAP-box: a novel, low-cost and easy-to-fabricate 3D-printed box for the storage and transportation of dissolving microneedle array patches

    Freier Zugriff
    Anjani, Qonita Kurnia / Cárcamo-Martínez, Álvaro / Wardoyo, Luki Ahmadi Hari et al. | BASE | 2024
    Schlagwörter: 3D-printing

    A fault tolerant neural network for space-based 3D printing quality assessment

    Tang, Jianning / Wu, Xiaofeng | Elsevier | 2024
    Schlagwörter: 3D printing

    Design and evaluation of compressive properties of 3D-printed PLA stochastic open-cell foam

    Khennab, Abdelghani / Benhizia, Abdennour | Taylor & Francis Verlag | 2024
    Schlagwörter: 3D printing

    Superior Al90Mg10-Based Composite Fuel Grain for a Hybrid Rocket Engine

    Wang, Zezhong / Lin, Xin / Pan, Junjie et al. | AIAA | 2024
    Schlagwörter: 3D Printing

    Application of 3D Printed Vacuum-Actuated Module with Multi-soft Material to Support Handwork Rehabilitation

    Abe, Shoma / Ogawa, Jun / Watanabe, Yosuke et al. | Springer Verlag | 2024
    Schlagwörter: 3D printing

    Aeroelastic Simulation and Experimental Validation of a 3D-Printed Passive Morphing Airfoil

    Ochi, Shuji / Kai, Shoko / Takase, Kohei et al. | AIAA | 2024
    Schlagwörter: 3D Printing

    Optimization and Testing of DC Electromagnetic Pump for Liquid Metal Space Use

    Qiao, Mengwen / Zhou, Yixin / Liu, Guilin et al. | AIAA | 2024
    Schlagwörter: 3D Printing

    The Jump into the Void

    Tenetz, Antti | Springer Verlag | 2024
    Schlagwörter: 3d—modeling and printing

    Self-deployable hinges for monolithic space structures using multi-material additive manufacturing

    Hunter, Colin / Vijayachandran, Avinkrishnan / Waas, Anthony M. | Elsevier | 2023
    Schlagwörter: Multi-material 3D printing , Polyjet printing

    Additive Manufacturing Applications in Maritime Education

    Gonzaga, Elliot / Tuazon, Brian Jumaquio / Garcia, Joseph Alfred V. | Trans Tech Publications | 2023
    Schlagwörter: 3D Printing

    Digital light 3D printing of a polymer composite featuring robustness, self-healing, recyclability and tailorable mechanical properties

    Freier Zugriff
    Huang, Wei / Zhang, Jianhui / Singh, Vikramjeet et al. | BASE | 2023
    Schlagwörter: DLP printing

    Robotic 3D Printing of sustainable structures ; Robot 3D-printing med hållbara strukturer

    Freier Zugriff
    Alkhatib, Tammam | BASE | 2023
    Schlagwörter: 3D printing , Robotic 3D printing

    Current Status and Prospects for Quantification of 3D Printing

    Huang, Yaoxin / Chen, Jiaqi | Springer Verlag | 2023
    Schlagwörter: 3D printing

    Remote Data Acquisition Using UAVs and Custom Sensor Node Technology

    Freier Zugriff
    Agustin Bernier-Vega / Kyle Barton / Isaac Olson et al. | DOAJ | 2023
    Schlagwörter: 3D printing

    Use of volumetric additive manufacturing as an in-space manufacturing technology

    Waddell, Taylor / Toombs, Joseph / Reilly, Ashley et al. | Elsevier | 2023
    Schlagwörter: Volumetric printing

    Three-Finger Robotic Gripper for Irregular-Shaped Objects

    Bhatlawande, Shripad / Ambekar, Mahi / Amilkanthwar, Siddhi et al. | Springer Verlag | 2023
    Schlagwörter: 3D Printing

    Optimization of the Surface of Drone Propeller Manufactured in 3D Printer

    Seçgin, Ömer / Sogut, M. Ziya | Springer Verlag | 2023
    Schlagwörter: 3d printing

    Flex-Structural Embedded Flexible Strain Sensor via 3D Printing

    Han, Hongyu / Xie, Xumingyang / Li, Bo et al. | Springer Verlag | 2023
    Schlagwörter: 3D printing

    Filaments for 3D Printers from Surgical Masks, Cornstarch and Plastic Bottles Generated by COVID-19

    Aliaga, Kevin / Zevallos, Enori / Arroyo, Corina et al. | Springer Verlag | 2023
    Schlagwörter: 3D printing and recycling

    Development of microstructures for the formation of metamaterial properties of piezoelectric elements

    Freier Zugriff
    V. S. But / A. A. Kobelev / S. V. Karpeev | DOAJ | 2023
    Schlagwörter: 3d printing

    Performative Ornament: Enhancing Humidity and Light Levels for Plants in Multispecies Design

    Freier Zugriff
    Macruz, Andrea / Daneluzzo, Mirko / Tawakul, Hind | Springer Verlag | 2023
    Schlagwörter: 3D printing

    Damage Mechanisms of Multilayer Axisymmetric Shells Obtained by the FDM Method

    Salenko, Olexandr / Dzhulii, Dmytro / Drahobetskyi, Volodymyr et al. | Springer Verlag | 2023
    Schlagwörter: 3D Printing

    Numerical Simulation of the Coalescence Behavior of Intermittent Structures with Fissures

    Dong, Qianqian / Wu, Yulin / Chen, Qiyang | Springer Verlag | 2023
    Schlagwörter: 3D printing technology

    Life Cycle Assessment of Wire Arc Additive Manufacturing Process

    Kokare, Samruddha / Matos, Florinda / Oliveira, J. P. et al. | Springer Verlag | 2023
    Schlagwörter: 3D printing

    Fabrication of Reinforced 3D Concrete Printing Formwork

    Freier Zugriff
    Luo, Jiaxiang / Gao, Tianyi / Yuan, Philip F. | Springer Verlag | 2023
    Schlagwörter: 3D concrete printing formwork Robotic fabrication

    Performance of Seismically Isolated Pile-supported Structures through 1 g Shaking Table Tests

    Yun, Jung Won / Kim, Do Yoon / Choi, Byung Hoon et al. | Springer Verlag | 2023
    Schlagwörter: 3D printing

    MOLDAM additive manufacturing robotic cell for extruding thermoplastic pellets

    Freier Zugriff
    Bengoa, Pablo / Antolín-Urbaneja, Juan Carlos / González Ojeda, Itzel de Jesus et al. | BASE | 2023
    Schlagwörter: 3D printing

    High Vacuum Capable Fused Filament Fabrication 3D Printer, Part II: High-Temperature Polymers Suitable for In-Space Manufacturing

    Spicer, Randy / Miranda, Fatima / Cote, Tom et al. | AIAA | 2023
    Schlagwörter: 3D Printing

    Rheological, Ballistic, and Mechanical Properties of 3D Printed, Photocured Composite Propellants

    Lajoie, Justin / Blocker, Jacob / Sippel, Travis | AIAA | 2023
    Schlagwörter: 3D Printing

    CAD, Laser Powder Bed Fusion Fabrication and Post-processing of Customized Metal Dental Products

    Lesyk, Dmytro / Lymar, Oleksandr / Dzhemelinskyi, Vitaliy et al. | Springer Verlag | 2023
    Schlagwörter: 3D Printing

    High Vacuum Capable Fused Filament Fabrication 3D Printer, Part I: Low-Temperature Polymers and Early Lessons Learned

    Spicer, Randy / Miranda, Fatima / Cote, Tom et al. | AIAA | 2023
    Schlagwörter: 3D Printing

    AFM Analysis of 3D Printing PEI for Automotive Applications

    Nguyen, Khanh Q. / Vuillaume, Pascal Y. / Robert, Mathieu et al. | Springer Verlag | 2023
    Schlagwörter: Fused deposition modelling (FDM) and 3D printing technologies

    Robotic knitcrete: computational design and fabrication of a pedestrian bridge using robotic shotcrete on a 3D-Knitted formwork

    Freier Zugriff
    Rennen, Philipp / Gantner, Stefan / Dielemans, Gido et al. | BASE | 2023
    Schlagwörter: additive manufacturing in construction -- shotcrete 3D printing -- stay-in-place formwork -- knitcrete -- flexible formwork -- robotic fiber winding -- green-state post-processing -- digital fabrication

    Aerial additive manufacturing with multiple autonomous robots.

    Freier Zugriff
    Zhang, Ketao / Chermprayong, Pisak / Xiao, Feng et al. | BASE | 2022
    Schlagwörter: Printing

    Reinforcement Strategies for Additive Manufacturing in Construction Based on Dynamic Fibre Winding: Concepts and Initial Case Studies

    Freier Zugriff
    Gantner, Stefan / Rothe, Tom-Niklas / Hühne, Christian et al. | BASE | 2022
    Schlagwörter: 3D Concrete Printing , Shotcrete 3D Printing , Large Particle 3D Concrete Printing

    Additive Manufacturing of Large Structures Using Free-Flying Satellites

    Freier Zugriff
    Jonckers, Declan / Tauscher, Oliver / Thakur, Aditya R. et al. | BASE | 2022
    Schlagwörter: additive manufacturing -- microgravity (μg) -- large scale 3D printing -- robotic 3D printing -- freeform 3D printing -- in space manufacturing

    Lunar shelter construction issues: The state-of-the-art towards 3D printing technologies

    Ulubeyli, Serdar | Elsevier | 2022
    Schlagwörter: 3D printing

    The mobile production vehicle routing problem:Using 3D printing in last mile distribution

    Freier Zugriff
    Wang, Yu / Ropke, Stefan / Wen, Min et al. | BASE | 2022
    Schlagwörter: 3D Printing

    An Affordable Upper-Limb Exoskeleton Concept for Rehabilitation Applications

    Freier Zugriff
    Palazzi E. / Luzi L. / Dimo E. et al. | BASE | 2022
    Schlagwörter: 3D printing

    An Alternative Parallel Mechanism for Horizontal Positioning of a Nozzle in an FDM 3D Printer

    Freier Zugriff
    Ida, Edoardo / Nanetti, Federico / Mottola, Giovanni | BASE | 2022
    Schlagwörter: 3D printing

      An Alternative Parallel Mechanism for Horizontal Positioning of a Nozzle in an FDM 3D Printer

      Freier Zugriff
      Ida, Edoardo / Nanetti, Federico / Mottola, Giovanni | BASE | 2022
      Schlagwörter: 3D printing

    Autonomous Mobile 3D Printing of Large-Scale Trajectories

    Freier Zugriff
    Sustarevas, Julius / Kanoulas, Dimitrios / Julier, Simon | BASE | 2022
    Schlagwörter: Three-dimensional printing

    Water Retention Properties of a Fused Deposition Modeling Based 3D Printed Polylactic Acid Vessel

    Saniman, Muhammad Nur Farhan / Dzulkifli, Nadzir Akif / Wahid, Khairul Anuar Abd et al. | Springer Verlag | 2022
    Schlagwörter: 3D printing

    Algorithms for Large Scale Additive Manufacturing in a Free-Flying Environment

    Freier Zugriff
    Tauscher, Oliver / Jonckers, Declan / Thakur, Aditya R. | BASE | 2022
    Schlagwörter: large-scale additive manufacturing -- in-space manufacturing -- freeform 3D printing -- mobile 3D printing -- free-flying environment