1–50 von 354 Ergebnissen
|

    Clutch dual-disc brake design and braking efficiency test of heavy-duty vehicle

    Tan, Xingqiang / Zhang, Benwen | SPIE | 2024
    -duty truck because of it’s short braking distance, strong braking force, good performance of heat dissipation and low operation force compared ...

    Design and Development of Ground Testing Benches for Aircraft Electric Propulsion Systems

    Deng, Shuhao / Lei, Tao / Kang, Da et al. | Springer Verlag | 2024
    system ground test bench was developed and built, including thruster force testing units, digital acquisition system, cooling and thermal ...
    Schlagwörter: Aerospace Technology and Astronautics

    Design and calculation of ventilation system for civil aircraft landing gear compartment

    Li, Chuang / Wu, Chenhan | SPIE | 2024
    of plan A has a better overall ventilation effect on the landing gear compartment, and the cooling effect of the upper and lower brake carbon ...

    Effect of Phase Change Material Dimension on Maximum Temperature of a Lithium-Ion Battery

    Morali, Uğur | Springer Verlag | 2023
    temperature within safe temperature limits. Results showed the effect of PCM width on the maximum battery temperature and temperature distribution ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Aerospace Technology and Astronautics , Renewable and Green Energy , Energy Policy, Economics and Management

    Computational Analysis of Re-entry Space Vehicle at Supersonic and Hypersonic Speed

    Vala, Jignesh / Rana, Mehul K. / Mistry, Ayushi et al. | Springer Verlag | 2023
    re-entry vehicles are especially design to withstand extreme heat and aerodynamic forces. In this chapter, the effect of flight altitude on ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Aerodynamic heating , Aerospace Technology and Astronautics

    Acoustic Emission and Acousto-Ultrasonic Monitoring in High-Temperature Environments

    Pollock, Luke / Wild, Graham | Springer Verlag | 2023

    This chapter presents a summary of works completed towards the understanding of acoustic emission (AE) and

     ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Aerospace Technology and Astronautics

    Study of Installation Effects on Automotive Cooling Fan Noise

    Weng, Chenyang / Knutsson, Magnus / Abom, Mats et al. | SAE Technical Papers | 2022
    main noise source on conventional vehicles, noise from other components becomes more perceivable; among these components, the cooling fan is ...
    Verlag: Society of Automotive Engineers , SAE International

    CFD Simulation of Oil Jet Piston Cooling Applied to Pistons with Cooling Gallery

    Hopf, Anselm / Weber, Carsten / Kraemer, Frank et al. | SAE Technical Papers | 2022
    , computational fluid dynamics (CFD) simulations help to quantify the piston cooling performance and provide detailed insights into the complex ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Effect of Fuel Cetane Number on the Performance of Catalyst-Heating Operation in a Medium-duty Diesel Engine

    Wu, Angela / Lopez Pintor, Dario / Cho, Seokwon et al. | SAE Technical Papers | 2022
    strategy. The two post injections are block-shifted to increasingly retarded timings, and the effects on exhaust heat and pollutant emissions are ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Environmental regulations and standards

    Numerical Modelling of Coolant Filling and De-aeration in a Battery Electric Vehicle Cooling System

    Motin, Abdul / Srinivasan, Chiranth / Slike, Jody et al. | SAE Technical Papers | 2022
    Trapped air bubbles inside coolant systems have adverse effect on the cooling performance. Hence, it is imperative to ensure an effective ...
    Verlag: Society of Automotive Engineers , SAE International

    Adjoint Method for the Optimisation of Conformal Cooling Channels of 3-D Printed High-Pressure Tools for Aluminium Casting

    Abo-Serie, Essam F. / Jewkes, James / Dodd, Paul et al. | SAE Technical Papers | 2022
    The emergence of additive manufacturing (AM) technology has enabled the internal cooling channel layout for high pressure aluminium die ...
    Verlag: Society of Automotive Engineers , SAE International

    Battery Electric Vehicles Energy Consumption Breakdown from On-Road Trips1

    Tansini, Alessandro / Currò, Davide / Komnos, Dimitrios et al. | SAE Technical Papers | 2022
    a high variability in real-world energy consumption, as electric energy is used both for cabin heating and cooling, which might lead to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: On-board diagnostics (OBD) , Navigation and guidance systems

    Influence of Wheel Bending Stiffness on Lateral Tire Characteristics

    Linden, Michael / Eckstein, Lutz / Schlupek, Martin et al. | Springer Verlag | 2022
    wheel is the first connecting element between the tire and the body of the vehicle. As a result, the wheel has an impact on the driving dynamic ...
    Schlagwörter: Wheel influence on tire properties

    Design of a Human-Centric Auto-Climate Control System for Electric Vehicles

    Tiwari, Ankit / Arsenault, Jeff / Mandali, Satya et al. | SAE Technical Papers | 2022
    cooling. Unlike the central HVAC system, localized heating and cooling devices such as climate-controlled seats, steering wheel heaters, neck ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Willans Line Bidirectional Power Flow Model for Energy Consumption of Electric Vehicles

    Harvey, Dan / Nelson, Douglas | SAE Technical Papers | 2022
    then be applied for other drive cycles, road grades, and parasitic accessory loads due to cabin or battery heating, air conditioning/cooling ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sensors and actuators , Simulation and modeling , On-board vehicle charging systems

    Development of Resin Water Jacket Case for Traction Inverter Aiming to Downsizing and Light-Weighting

    Okubo, Akinori / Nakajima, Masaya / Hatanaka, Seiji et al. | SAE Technical Papers | 2022
    technical issues in terms of collision performance, electromagnetic compatibility (EMC), and cooling performance because of the difference in the ...
    Verlag: Society of Automotive Engineers , SAE International

    Heatable Vehicle Glazing with Antennas

    Dai, David | SAE Technical Papers | 2022
    established between the heating bus bar, bus bar extension and the peripheral edge of an electrically conductive IR reflective coating. The antenna ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Windows and windshields

    Analysis of the Piston Group Friction in a Single-Cylinder Gasoline Engine When Operated with Synthetic Fuel DMC/MeFo

    Kraus, Christoph / Wachtmeister, Georg / Binder, Jürgen et al. | SAE Technical Papers | 2022
    temperatures of the cylinder liner and piston of the research engine were measured. Depending on the load point, friction losses were reduced by up to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Development of a Ceramic EHC

    Hirooka, Shigemasa / Iwasaki, Shingo / Korenaga, Shingo et al. | SAE Technical Papers | 2022
    , can easily activate the catalyst before engine start-up. The research results reported on the use of the direct heating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Starters and starting

    Computing Complexity Reduction for Predictive Control of Engine Thermal Management System

    Lee, Jason / Ha, Jinho / Holmer, Justin et al. | SAE Technical Papers | 2022
    paper presented a model predictive control (MPC) design concept and demonstrated energy efficiency improvements by enabling engine pre-cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Improving Performance of Heating, Ventilation, and Air-Conditioning System of Electric Vehicle Using Evaporative Cooling: A Model-Based Analysis

    Shandilya, Anant / Melby, Grayson / Ranjan, Sant et al. | SAE Technical Papers | 2021
    , a cooling methodology based on direct evaporative cooling (DEC) is introduced, and the benefits of such a technique are illustrated by the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Determination of Effect of Quenching Parameters on Mechanical Properties of Industrial Steels by Experimental and Simulation Analysis

    Harinarain, Ajay / Saxena, Deepak / Dubey, Mukesh Kumar et al. | SAE Technical Papers | 2021
    of quenching and these are greatly influenced by cooling time, cooling rate, quench media, etc. The cooling rate of quenchant must be ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Cooling , Simulation and modeling , Coatings, colorants, and finishes

    Improvement of Gasoline Engine Performance and Fuel Economy Through New Hollow Head Valve

    Lia, Luigi / De Giovanni, Pierfrancesco | Springer Verlag | 2021

    In recent years, the international emission standards for vehicles have become increasingly stringent

     ...

    Fuel Cell Vehicle Thermal Management

    SAE Technical Papers | 2021
    The purpose of this SAE Information Report is to provide an overview of special requirements and practices in fuel cell vehicle thermal ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems , Heating, ventilation, and air conditioning systems (HVAC)

    Potential Analysis of a DMC/MeFo Mixture in a DISI Single and Multi-Cylinder Light Vehicle Gasoline Engine

    Gadomski, Bartosch / Kraus, Christoph / Thamm, Fabian et al. | SAE Technical Papers | 2021
    increased by 16 % at maximum low-end torque compared to gasoline. The increased in-cylinder cooling and the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Engineering Challenges in Alloy Wheel Rim for Safety Simulations

    Gese, Helmut / Daphal, Pratap / Khare, Pratyush et al. | SAE Technical Papers | 2021
    considering its brittle nature, porosity and inhomogeneity in material properties across different regions of wheel rim due to mold design, cooling ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Machine Learning Based Parameter Calibration for Multi-Scale Material Modeling of Laser Powder Bed Fusion (L-PBF) AlSi10Mg

    Xu, Hongyi / Lai, Wei-Jen / Su, Xuming et al. | SAE Technical Papers | 2021
    compared with their counterparts via conventional manufacturing process, due to the unique microstructure induced by extremely high heating and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Heat dissipation assembly of electric water pump and cooling fan

    Freier Zugriff
    XIAO JIE | Europäisches Patentamt | 2020

    The invention discloses a heat dissipation assembly of an electric water pump and a cooling fan. The heat dissipation assembly comprises

     ...

    Performance optimization of ground water heat pump system for space heating and cooling applications

    Krishnan, Murugesan / Salalagaon, Mahalingesh / Thomas, Hywel | TIBKAT | 2020

    Effects of continuous cooling on physiological and biochemical indexes of the blue mussels

    Wang, Zejin / RAO, Dechao / HUANG, Ying et al. | TIBKAT | 2020

    Development of Cooling Fan Model and Heat Exchange Model of Condenser to Predict the Cooling and the Heat Resistance Performance of Vehicle

    Yokota, Kazutaka / Yoshitake, Kunihiko / Fukuchi, Yuichi | SAE Technical Papers | 2020
    The cooling performance and the heat resistance performance of commercial vehicle are balanced with aerodynamic performance, output power ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Forced-air cooling of dairy product in pallets : influence of process parameters on energy and quality

    Havet, Michel / Patissier, Edith / Guihard, Luc et al. | TIBKAT | 2020

    Battery Entropic Heating Coefficient Testing and Use in Cell-Level Loss Modeling for Extreme Fast Charging

    Emadi, Ali / Cotton, James / Lempert, Jeremy et al. | SAE Technical Papers | 2020
    function of the current, the temperature, and the entropic heating coefficient, which itself is dependent on the cell chemistry. The total cell ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sensors and actuators , Simulation and modeling

    A Study on the Effect of Debris Location on a Double Element Wing in Ground Effect

    Garmory, Andrew / Patel, Dipesh / Hodgson, Graham et al. | SAE Technical Papers | 2020
    the onset flows to other surfaces and cooling systems. Rubber tyre debris from the soft compounds used in such series can become attached to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Imaging and visualization

    Improving Winter Fuel Economy by Using Weather Information

    Cosgrove, David / Hirabayashi, Hidekazu / Oshikiri, Rino | SAE Technical Papers | 2020
    When the air conditioning (A/C) is turned on, the intake air to the HVAC is cooled at the evaporator. This is not only used for cooling the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Heating, ventilation, and air conditioning systems (HVAC)

    Reduced Power Seat Heater System Using Thermal Wave Technology

    Ziolek, Scott | SAE Technical Papers | 2020
    temperatures (each with its own tolerance range). The amplitude and frequency of these oscillations can be changed based on secondary trigger events ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC) , Seats and seating

    Artificial Neural Network Based Predictive Approach in Vehicle Thermal Systems Applications

    Mirzabeygi, Pooya / Natarajan, Shankar | SAE Technical Papers | 2020
    instrumentation and testing is costly and time-consuming. This paper focuses on a novel approach using the Artificial Neural Network (ANN). ANNs are ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Conjugate Heat Transfer CFD Analysis of an Oil Cooled Automotive Electrical Motor

    Srinivasan, Chiranth / Wang, Deming / Schlautman, Jeff et al. | SAE Technical Papers | 2020
    as they have tremendous impact on the design, spacing and sizes of these motors. In this paper, with the Simerics, Inc. software, Simerics-MP ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Propellers and rotors , Simulation and modeling , Research and development

    Co-Simulation Methodology for PHEV Thermal System Development

    Biswas, Auvi / Lindquist, Craig / Khandaker, Masuma et al. | SAE Technical Papers | 2020
    associated with the interior Heating, Ventilation, and Air Conditioning (HVAC) cooling system. For proper sizing of the condenser, chiller etc., one ...
    Verlag: Society of Automotive Engineers , SAE International

    Electrical Heated Epoxy Tool for Rotational Moulding Application

    Patil, Amit S / Gandhi, Sorna Rajendran | SAE Technical Papers | 2020
    which has its own limitation on energy loss, the other means is by direct heating and cooling of mould by passing hot oil/water in the mould to ...
    Verlag: Society of Automotive Engineers , SAE International

    Safety and Design Standards for Motor Vehicle Refrigerant Vapor Compression Systems

    SAE Technical Papers | 2020
    This SAE Standard applies to refrigerant vapor compression systems that provide cooling and/or heating for passenger cars, light trucks ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure modes and effects analysis

    A Fast Modeling Approach for the Numerical Prediction of Urea Deposit Formation

    Quissek, Max / Lauer, Thomas / Budziankou, Uladzimir | SAE Technical Papers | 2020
    wall wetting and cooling, the impingement heat transfer as well as the impingement model were modified based on optical investigations.In order ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Environmental regulations and standards

    Thermal Analysis of Clutch Assembly Using Co-Simulation Approach

    Sugumar, Ganesh / Raju, Kumar / Gopinathan, Nagarajan et al. | SAE Technical Papers | 2020
    frequency of engagement and disengagement of the clutch, it generates transient heating and cooling cycles.Hill fade test with maximum GVW ...
    Verlag: Society of Automotive Engineers , SAE International

    Universal Electric Vehicle Thermal Management System

    Rana, Tarun / Yamamoto, Yuji | SAE Technical Papers | 2020
    constrained to cold climate applications securing better COP for heating function but sacrificing cooling COP when the same TMS applied to hot climate ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    Energy Saving Glazing and Its Compatibility with Heating, Antenna and Wireless Communication

    Dai, David / Rustagi, Mukesh / Dishart, Peter | SAE Technical Papers | 2019
    reduction benefits of the coating. One of the methods is to integrate antennas on to the coated glazing and have glass antenna act as a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Windows and windshields

    CFD Simulation of Oil Jets for Piston Cooling Applications Comparing the Level Set and the Volume of Fluid Method

    Hopf, Anselm / Weber, Carsten / Kraemer, Frank et al. | SAE Technical Papers | 2019
    . Furthermore, several applications of oil jet piston cooling on Ford engines have been investigated and demonstrated. For example, three-dimensional ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling