The cooling performance and the heat resistance performance of commercial vehicle are balanced with aerodynamic performance, output power of powertrain, styling, cost and many other parameters. Therefore, it is desired to predict the cooling performance and the heat resistance performance with high accuracy at the early stage of development. Among the three basic forms of heat transfer (conduction, convection and radiation), solving thermal conduction accurately is difficult, because modeling of “correct shape” and setting of coefficient of thermal conductivity for each material need many of time and efforts at the early stage of development. Correct shape means that each part should be attached correctly to generate the solid mesh with high quality. Therefore, it is more efficient and realistic method to predict the air temperature distribution around the rubber/resin part instead of using the surface temperature at the preliminary design stage. The air temperature distribution in the engine compartment is dominated by the flow distribution from fans, the heat rejected by heat exchangers, AC-generator and the convecting heat by surface temperature of parts. In the case of steady middle/high vehicle speed modes, thermal convection has larger effects on the air temperature distribution. To predict these phenomena with high accuracy, the fan model and condenser model are developed. The fan model provides the accurate P-Q performance based on a specification and the flow distribution based on the LES results of the sliding mesh method with low computational cost. The heat rejection by the condenser is concentrated around the inlet tube of core. To reproduce this distribution, the phase change of refrigerant is solved in the condenser model. The accuracy of these models is confirmed by using component experiments and vehicle measurements. Accuracy of heat-exchanger coolant temperature is within 2K and air temperature in the engine compartment is 5K respectively.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of Cooling Fan Model and Heat Exchange Model of Condenser to Predict the Cooling and the Heat Resistance Performance of Vehicle


    Weitere Titelangaben:

    Sae Int. J. Adv. and Curr. Prac. in Mobility


    Beteiligte:

    Kongress:

    WCX SAE World Congress Experience ; 2020



    Erscheinungsdatum :

    2020-04-14


    Format / Umfang :

    13 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Vehicle condenser cooling system

    CHOI SUNG WOO / SON BYEONG RAE / WOO JAE SEUNG et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Prediction of Engine Cooling Performance Considering the Heat Dissipation of Cooler Condenser

    Federation Internationale des Societes d'Ingenieurs des Techniques de l'Automobile | British Library Conference Proceedings | 2002


    Validation and design of heavy vehicle cooling system with waste heat recovery condenser

    Dickson,J. / Ellis,M. / Rousseau,T. et al. | Kraftfahrwesen | 2014


    Validation and Design of Heavy Vehicle Cooling System with Waste Heat Recovery Condenser

    Smith, Jeff / Dickson, Jon / Ellis, Matthew et al. | SAE Technical Papers | 2014