1–50 von 33,411 Ergebnissen
|

    Joining by plastic deformation

    Mori, Ken-ichiro / Bay, Niels / Fratini, Livan et al. | Tema Archiv | 2013
    Verlag: Elsevier , Amsterdam

    Experimental analysis on the performance of lithium based batteries for road full electric and hybrid vehicles

    Capasso, Clemente / Veneri, Ottorino | Tema Archiv | 2014
    Verlag: Elsevier , Exeter

    Comparison of multi-objective optimization techniques applied to off-gas management within an integrated steelwork

    Porzio, Giacomo Filippo / Nastasi, Gianluca / Colla, Valentina et al. | Tema Archiv | 2014
    Verlag: Elsevier , Exeter

    Open-architecture products

    Koren, Y. / Hu, S.J. / Gu, Peihua et al. | Tema Archiv | 2013
    Verlag: Elsevier , Amsterdam

    Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments

    Diaz-Elsayed, Nancy / Jondral, Annabel / Greinacher, Sebastian et al. | Tema Archiv | 2013
    Verlag: Elsevier , Amsterdam

    Advances in centerless grinding technology

    Hashimoto, Fukuo / Gallego, Ivan / Oliveira, Joao F.G. et al. | Tema Archiv | 2012
    Verlag: Elsevier , Amsterdam

    The influence of spot weld position variation on geometrical quality

    Söderberg, Rikard / Wärmefjord, Kristina / Lindkvist, Lars et al. | Tema Archiv | 2012
    Verlag: Elsevier , Amsterdam

    Feasibility of a Supraglottic Airway Device for Transbronchial Lung Cryobiopsy—A Retrospective Analysis

    Schmutz, Axel / Dürk, Thorsten / Idzko, Marco et al. | British Library Conference Proceedings | 2016
    Verlag: Elsevier

    Industrial challenges in grinding

    Oliveira, J.F.G. / Silva, E.J. / Guo, C. et al. | Tema Archiv | 2009
    Verlag: Elsevier , Amsterdam

    Deep hole drilling using tools with small diameters - Process analysis and process design

    Zabel, Andreas / Heilmann, Markus | Tema Archiv | 2012
    Verlag: Elsevier , Amsterdam

    Precision engineering for wind energy systems

    Goch, Gert / Knapp, Wolfgang / Härtig, Frank | Tema Archiv | 2012
    Verlag: Elsevier , Amsterdam

    Environmental impact analysis of composite use in car manufacturing

    Duflou, J.R. / Moor, J. de / Verpoest, I. et al. | Tema Archiv | 2009
    Verlag: Elsevier , Amsterdam

    Bendability of advanced high strength steels - A new evaluation procedure

    Kaupper, Markus / Merklein, Marion | Tema Archiv | 2013
    Verlag: Elsevier , Amsterdam

    Surface technology for automotive engineering

    Bewilogua, K. / Bräuer, G. / Dietz, A. et al. | Tema Archiv | 2009
    Verlag: Elsevier , Amsterdam

    Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application

    Okasha, M.M. / Mativenga, P.T. / Driver, N. et al. | Tema Archiv | 2010
    Verlag: Elsevier , Amsterdam

    Supraglottic Airway Device for Transbronchial Lung Cryobiopsy

    Gelzinis, Theresa A. | British Library Conference Proceedings | 2016
    Verlag: Elsevier

    Metrology of freeform shaped parts

    Savio, E. / Chiffre, L. de / Schmitt, R. | Tema Archiv | 2007
    Verlag: Elsevier , Amsterdam

    Laser-based repair of carbon fiber reinforced plastics

    Fischer, F. / Romoli, L. / Kling, R. | Tema Archiv | 2010
    Verlag: Elsevier , Amsterdam

    Versatile autonomous transportation vehicle for highly flexible use in industrial applications

    Franke, Jörg / Lütteke, Felix | Tema Archiv | 2012
    Verlag: Elsevier , Amsterdam

    Cost innovations by integrative product and production development

    Kampker, Achim / Schuh, Günther / Burggräf, Peter et al. | Tema Archiv | 2012
    Verlag: Elsevier , Amsterdam

    Cyclic behavior of short glass fiber reinforced polyamide for fatigue life prediction of automotive components

    Launay, A. / Marco, Y. / Maitournam, M.H. et al. | Tema Archiv | 2010
    Verlag: Elsevier , Oxford

    A web based tool for dynamic job rotation scheduling using multiple criteria

    Michalos, George / Makris, Sotiris / Mourtzis, Dimitris | Tema Archiv | 2010
    Verlag: Elsevier , Amsterdam

    Sheet metal forming at elevated temperatures

    Neugebauer, R. / Altan, T. / Geiger, M. et al. | Tema Archiv | 2006
    Verlag: Elsevier , Amsterdam

    Co-evolution hypotheses and model for manufacturing planning

    AlGeddawy, T. / ElMaraghy, H. | Tema Archiv | 2010
    Verlag: Elsevier , Amsterdam

    Analysis of YAG laser lap-welding of zinc coated steel sheets

    Schmidt, M. / Otto, A. / Kägeler, C. | Tema Archiv | 2008
    Verlag: Elsevier , Amsterdam

    Early design verification of complex assembly variability using a hybrid - model based and physical testing - methodology

    Maropoulos, P.G. / Vichare, P. / Martin, O. et al. | Tema Archiv | 2010
    Verlag: Elsevier , Amsterdam

    Cross-border reproductive care: a future research agenda

    Inhorn, M.C. / Gurtin, Z.B. | British Library Conference Proceedings | 2011
    Verlag: Elsevier

    Life cycle management of production facilities using semantic web technologies

    Harms, R. / Fleschutz, T. / Seliger, G. | Tema Archiv | 2010
    Verlag: Elsevier , Amsterdam

    Rolling contact fatigue of railways wheels: Influence of steel grade and sliding conditions

    Brunel, J.F. / Charkaluk, E. / Dufrenoy, P. et al. | Tema Archiv | 2010
    Verlag: Elsevier , Oxford

    Large volume metrology process models: A framework for integrating measurement with assembly planning

    Maropoulos, P.G. / Guo, Y. / Jamshidi, J. et al. | Tema Archiv | 2008
    Verlag: Elsevier , Amsterdam

    Experimental and numerical investigations of external reinforced damaged pipelines

    Lukacs, Janos / Nagy, Gyula / Török, Imre et al. | Tema Archiv | 2010
    Verlag: Elsevier , Oxford

    CRASH TESTING OF A CFRP COMMERCIAL AIRCRAFT SUB-CARGO FUSELAGE SECTION

    Delsart, David / Portemont, Gérald / Waimer, Matthias | British Library Conference Proceedings | 2016
    Verlag: Elsevier B.V

    MODELLING OF THE FRACTURE OF A RAILWAY WHEEL

    Peixoto, Daniel F. C. / De Castro, Paulo M. S. T. | British Library Conference Proceedings | 2016
    Verlag: Elsevier B.V

    Design of a 4-DOF hybrid PKM module for large structural component assembly

    Huang, T. / Wang, P.F. / Zhao, X.M. et al. | Tema Archiv | 2010
    Verlag: Elsevier , Amsterdam

    Addressing Childrens Oral Health in the New Millennium: Trends in the Dental Workforce

    Mertz, E. / Mouradian, W. E. / American Academy of Pediatrics | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Evaluation of voluntary travel behaviour change: Experiences from three continents

    Brög, W. / Erl, E. / Ker, I. et al. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Editorial Board

    Chatterjee, Kiron / Bonsall, Peter W. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Electrochemical characterization of MnO2 as the cathode material for a high voltage hybrid capacitor

    Li, J. l. / Gao, F. / Jing, Y. et al. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Experimental study on Ti+Nb bearing ultra-low carbon bake hardening sheet steel hot-rolled in the ferrite region

    Chen, J. p. / Kang, Y. l. / Hao, Y. m. et al. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    A mathematical model capable of describing the liquid flow mainly in a blast furnace

    Wang, C. s. / Mu, X. j. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Is the container liner shipping industry an oligopoly?

    Sys, C. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Chinas economic rise and its implications for logistics: The Australian case

    Tongzon, J. / Nguyen, H. O. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Adaptation of heart rate and blood pressure to short and long duration space missions

    Verheyden, B. / Liu, J. / Beckers, F. et al. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    The role of echocardiography in the assessment of cardiac function in weightlessness-Our experience during parabolic flights

    Caiani, E.G. / Weinert, L. / Lang, R.M. et al. | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Special Issue on Snow Mobility

    Shoop, S. / Lee, J. H. / International Society for Terrain-Vehicle Systems | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    The potential for European aviation CO2 emissions reduction through the use of larger jet aircraft

    Morrell, P. / Air Transport Research Society | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    Unintended trajectories: liberalization and the geographies of private business flight

    Budd, L. / Graham, B. / Association of American Geographers | British Library Conference Proceedings | 2009
    Verlag: Elsevier

    An alternative approach for the cost-efficient laser welding of zinc-coated sheet metal

    Bley, H. / Weyand, L. / Luft, A. | Tema Archiv | 2007
    Verlag: Elsevier , Amsterdam