1–20 von 294 Ergebnissen
|

    Belüftungsregelung zur effizienten Aufheizung des Fahrzeuginnenraums

    Markowitz, Markus | Tema Archiv | 2012
    Zur effizienten Aufheizung des Fahrzeuginnenraums unter Kaltbedingungen wurde in der Belüftungsregelung der Klimaautomatik eine Funktion ...
    Schlagwörter: Kühlkreislauf

    Untersuchungen zu einem optimierten Kühlsystem

    Kuthada, T. / Genger, M. / Widdecke, N. et al. | Tema Archiv | 2004
    Schlagwörter: Kühlsystem , Kühlung

    Comparison of established heavy brake heating/cooling models with HVE brake designer in a real mountain accident

    Ruhl, Roland A. / Ruhl, Roland L. / Inendino, Louis V. et al. | Tema Archiv | 2006
    gear. The effect on brake temperatures from prior uphill and downhill stretches encountered just before the crash is considered. The crash is ...

    Cooling performance of LED headlamp with heat sink and cooling fan in limited volume

    Cho, Hyunseok / Oh, Sangjune / Lee, Juhan et al. | Tema Archiv | 2009
    for vehicle, it analyzed a correlation between a size of radiating board and cooling performance by attaching a cooling fan and radiating ...
    Schlagwörter: Wärmeabfuhr

    Li-ion battery cooling in hybrid and electric cars - more than just another cooling request

    Heckenberger, Thomas / Neumeister, Dirk / Wiebelt, Achim et al. | Tema Archiv | 2009
    long lifetime. The focus of this work is on the cooling of Li-ion batteries to avoid overheating during operation.There is more than one ...
    Schlagwörter: Wärmeabfuhr

    Requirements on vehicle cooling systems due to alternative drive train concepts and CO2 reduction measures

    Dietz, Stefan / Korfmann, Steffen / Kammler, Thomas | Tema Archiv | 2009
    The need for low fuel consumption accompanied by low pollutant emissions is massively increasing the demands placed on component cooling ...

    Experimental and numerical investigation of film cooling in hypersonic flows

    Heufer, K.A. / Olivier, H. | Tema Archiv | 2009
    turbine blades. Thereby mostly air is led through discrete holes in the blade to establish a cooling film on the surface that reduces the ...

    Cooling of LEDs with synthetic jets

    Glowienko, Robert / Derlien, Hans / Ertunc, Özgür et al. | Tema Archiv | 2011
    article the formation of synthetic jets and their advantages were explained. Synthetic jets allow the directed cooling of LED-devices with low ...

    Application of Solar Heating System for Raw Petroleum During its Piping Transport

    He, Zinian | Tema Archiv | 2014
    A solar raw petroleum heating system to reduce viscosity of the petroleum for its easier piping transport is introduced in this paper. Some ...
    Schlagwörter: Heizungsanlage

    The effect of cooling rate on the mechanical properties and energy absorption potential of hardened boron steel

    Bardelcik, Alexander / Wells, Mary / Worswick, Michael | Tema Archiv | 2009
    were plotted for the various cooling rates and showed that small changes in cooling rate resulted in significant changes in the strength and ...
    Schlagwörter: Erwärmung

    Numerical Simulation of the Aerodynamics and Aerothermal Heating for a Hypersonic Vehicle

    Liu, Hai-Yong / Qiang, Hong-Fu | Tema Archiv | 2012
    A hypersonic forebody based on waverider and liftbody concept was presented. The configuration of a new hypersonic vehicle was designed by ...

    The effect of cure cycle heating rate on the fibre/matrix interface.

    Coenen, Victoria / Walker, Andrew / Day, Richard et al. | Tema Archiv | 2007
    product and manufacturing processes to remain viable. The aerospace industry is undergoing a materials revolution in the design and manufacture of ...

    Flatness-based control for an internal combustion engine cooling system

    Aschemann, H. / Prabel, R. / Gross, C. et al. | Tema Archiv | 2011
    and feedback control must maintain a desired nominal engine temperature. Furthermore, both fuel consumption and harmful emissions could be ...

    Oxynon CAB furnace - the next generation of aluminum brazing based on a rapid heating method

    Kanda, Kiichi / Konishi, Eiichiro | Tema Archiv | 2004
    partial repair/replacement of the muffle. Excellent temperature distribution within the heating zone due to high heat conductivity and emissivity ...

    Cascaded indirect integrated charge air cooling for passenger car diesel engines

    Schneider, Simon / Eilemann, Andreas / Stehlig, Jürgen | Tema Archiv | 2013
    cooling capacity, in addition to full control flexibility. This approach is necessary if the heat dissipation of the low-temperature circuit is no ...
    Schlagwörter: Wärmeabfuhr

    Performance Analysis of a Heat Pump Air Conditioning System Coupling with Battery Cooling for Electric Vehicles

    Zou, Huiming / Jiang, Bin / Wang, Qian et al. | Tema Archiv | 2014
    heating mode, to reheat the cold air on cooling mode, and to exhaust to the refrigeration system; as well as to dissipate to the outside air ...
    Schlagwörter: Kühlsystem

    Reciprocating battery cooling for hybrid and fuel cell vehicles

    Park, Chanwoo / Jaura, Arun K. | Tema Archiv | 2003
    boundaries of the battery cooling system, the battery cell temperatures are regulated with a very small fluctuation and the temperature differential ...
    Schlagwörter: Kühlsystem

    The effect of ship tilt and pitch on a capillary assisted thermosyphon (CAT) for shipboard electronics cooling

    Larsen, E.H. / Smith, A.N. / Cerza, M. et al. | Tema Archiv | 2003
    As microprocessors shrink in size and increase in power dissipation levels, the current need for advanced electronics cooling techniques is ...
    Schlagwörter: Kühlsystem

    Effects of heating on Teflon FEP thermal control material from the Hubble Space Telescope

    de Groh, Kim K. / Gaier, J.R. / Hall, R.L. et al. | Tema Archiv | 1999
    heating pristine and FEP exposed on HST was therefore conducted. Samples of pristine, SM1, and SM2 FEP were heated to 200 degree C and evaluated ...
    Verlag: Society for the Advancement of Material and Process Engineering (SAMPE) , Covina

    Usable models for free and forced cooling of commercial vehicle drum brakes

    Ruhl, Roland L. / Inendino, Louis V. / Southcombe, Ericka J. et al. | Tema Archiv | 2006
    and forced cooling (GSRS, UMTRI, Limpert, and HVE Brake Designer) are converted to consistent units. The units have been reduced to those ...
    Schlagwörter: Kühlung