21–40 von 140 Ergebnissen
|

    Studying the chemistry of HCCS in rapid compression machines

    Würmel, J. / Simmie, J.M. / Curran, H.J. | Tema Archiv | 2007
    devices are the same. There is no tool that describes, meaningfully, the physical and chemical processes occuring in one of the simplest research ...

    Structural steel for the application in offshore, wind and hydro energy production: comparison of application and welding properties of frequently used materials

    Schröter, Falko | Tema Archiv | 2011
    Energy production by wind and hydropower sets demanding requirements on the steel grades used for structural applications. The question of ...

    Strengthening materials specifications

    Sampath, K. | Tema Archiv | 2005
    approach to specify the chemical composition of high-performance welding electrodes for critical U.S. Navy applications. This approach helps to ...
    Schlagwörter: USA (United States of America)

    Steady-state characteristics of oxygen concentration cell sensors subjected to nonequilibrium gas mixtures

    Anderson, J.E. / Graves, Y.B. | Tema Archiv | 1981
    deviations from chemical equilibrium actually exist in the bulk exhaust stream. This is accomplished through use of catalytic electrodes that are ...

    Spacecraft ion propulsion development in the United Kingdom

    Fearn, D.G. | Tema Archiv | 1997
    The on-board propulsion system dominates the design of many spacecraft, particularly as regards mass and volume. However, the mass of this ...

    Sao Paulo aerosol characterization study

    Alonso, C.D. / Martins, M.H.R.B. / Romano, J. et al. | Tema Archiv | 1997
    The Sao Paulo Metropolitan area (SPMA) is characterized as having one of the worst air pollution problems in Brazil, with frequent ...

    Root bead profiles in hyperbaric GTAW of X70 pipeline

    Akselsen, Odd M. / Harsvaer, Ansgar / Fostervoll, Hans et al. | Tema Archiv | 2006
    This investigation began with the goal of studying the root bead penetration profiles in hyperbaric GTAW(Gas Tungsten Arc Welding) of X70 ...

    Review of hydrogen storage techniques for on board vehicle applications

    Durbin, D.J. / Malardier-Jugroot, C. | Tema Archiv | 2013
    storage. Mechanical compression as well as storage in chemical hydrides and absorption to carbon substrates has been investigated. An overview of ...

    Research status of active cooling of endothermic hydrocarbon fueled scramjet engine

    Ning, Wang / Yu, Pan / Jin, Zhou | Tema Archiv | 2013
    are put forward. The total heat sink of endothermic hydrocarbon fuel is found to be sufficient for scramjet cooling as the additional chemical ...

    Requirements for advanced mobile storage systems

    Ewald, R. | Tema Archiv | 1998
    Industrial Gases Industry and of chemical process engineering, on space technology and new developments, different methods of hydrogen storage have ...

    Recovery of thermomechanical exergy from cryofuels

    Fyke, A. / Li, D. / Crane, P. et al. | Tema Archiv | 1997
    the chemical exergy of such fuels. Due to their low temperatures, however, they contain thermomechanical exergy which is almost always wasted ...

    Quick reference guide for beta titanium alloys in the 00s

    Nyakana, S.L. / Fanning, J.C. / Boyer, R.R. | Tema Archiv | 2005
    Beta titanium alloys provide useful combinations of physical and mechanical properties, as well as a wide range of processing options and ...

    Purification process for chemical storage of hydrogen for fuel cell vehicles applications

    Swesi, Yousef / Ronze, Didier / Pitault, Isabelle et al. | Tema Archiv | 2007
    An alternative way to provide hydrogen in FCVs (fuel cell vehicles) consists of storing hydrogen in liquid hydrocarbons. Supplying hydrogen ...

    Protect and service

    Burki, Marti | Tema Archiv | 2004
    The development of functional coatings is becoming a priority for Asian car manufacturers. Both temperature and UV exposure are usually ...

    Progress in the design of CBE systems

    Mifsud, V.J. / Sullivan, P.W. / Williams, D. | Tema Archiv | 1990
    A gas flow control system for use in chemical beam epitaxial growth systems is described. This system employs a unique dual-valve control ...

    Process simulation in sheet metal forming

    Makinouchi, A. / Kawka, M. | Tema Archiv | 1994
    Vorstellung des am Institute of Physical and Chemical Research RIKEN, Saitama, J, entwickelten Finite-Elemente-Programms ITAS-3D zur ...

    Process industry heat exchanger R&D with possible implications for aerospace technology

    Pilavichi, P.A. | Tema Archiv | 1993
    exchangers, chemical reactors with integrated heat exchangers), gas-solid heat recovery, liquid-liquid heat recovery (shell and tube heat exchangers ...

    Preliminary experiment on improvement of underwater wet plasma welds using filler metal

    Fukushima, S. / Fukushima, T. / Kinugawa, J. | Tema Archiv | 1981
    The possibility of improving the ductility and notch toughness of underwater wet plasma welds was investigated by controlling the chemical ...

    Prediction of methanol loss in vapor phase during gas hydrate inhibition using Arrhenius-type functions

    Bahadori, Alireza / Vuthaluru, Hari B. | Tema Archiv | 2010
    leading to safety hazards to production/transportation systems and to substantial economic risks. The amount of hydrate inhibitor to be injected ...

    Potential use of transport and dispersion model output to supplement allied tactical publication-45 hazard area prediction templates

    Platt, Nathan / Jones, Leo | Tema Archiv | 2012
    Allied Tactical Publication-45(C) is the current US and NATO command doctrine for Nuclear, Chemical and Biological (NBC) events. ATP-45 is ...