The possibility of improving the ductility and notch toughness of underwater wet plasma welds was investigated by controlling the chemical composition of them using filler metals. The welding environment was selected in fresh water under the pressurized condition of 10 kgf/cm2 (gauge). Results of this experiment are summarized as follows. Two kinds of filler metals, one of them had the basic composition of 0.013 wt% carbon, 0.081 wt% silicon, 1.05 wt% manganese and iron as the balance - base filler metal - and the other was addded 0.59 wt% titanium to the above-mentkined base filler metal, were shown the possibility of improving the ductility of single pass double Vee butt joint. Addition of niobium along or moylbdenum with boron to the base filler metal had less contribution to the improvement of weld metal ductility. It is necessary to reconsider the chemical composition of filler metal for filled pass in multi-pass welding, because the dilution of the deposited metal with the base metal in filled pass differs from that of the root pass. (Wassmann)


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Preliminary experiment on improvement of underwater wet plasma welds using filler metal


    Weitere Titelangaben:

    Vorversuch zur Verbesserung von Unterwasserplasmaschweissnaehten mit Hilfe von Fuellmetallen
    Titel japanisch


    Beteiligte:
    Fukushima, S. (Autor:in) / Fukushima, T. (Autor:in) / Kinugawa, J. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    1981


    Format / Umfang :

    7 Seiten, 6 Bilder, 4 Tabellen, 7 Quellen


    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Japanisch




    On cooling of underwater welds

    Hasui, A. / Suga, Y. | Tema Archiv | 1979


    Robots to inspect welds underwater

    Kenzie, B. | Tema Archiv | 1994


    On cooling of underwater welds

    Hasui, A. / Suga, Y. | Tema Archiv | 1980


    Underwater nondestructive testing of ship hull welds

    Youshaw, R. / Dyer, C. | TIBKAT | 1979


    Underwater nondestructive testing of ship hull welds

    Youshaw, R. / Dyer, C. | Tema Archiv | 1979