This study investigated mix components, other than aggregate source, that were perceived to affect the ignition furnace mixture calibration. Four sets of experiments with one aggregate were designed and run to evaluate the effects of the amounts of lime, sulfur, calcium carboxylates, and fines. Five asphalt binders with different chemistries were evaluated. Two binders had high and low sulfur contents, respectively; two other binders contained relatively high concentrations of carboxylates. Various concentrations of hydrated lime (0 to 3 percent by weight) were added to mixtures and were found to have a significant effect on the ignition furnace correction factor for all five binders. The magnitude of the effect was large enough to cause the quality control tests to fail the tolerances established by the Virginia Department of Transportation. The lime appears to react with the sulfur dioxide (SO2) formed from the combustion of organic sulfur to generate calcium sulfate. The amount of sulfur present in the asphalt can significantly affect the ignition furnace correction factor. Initial thoughts that calcium carboxylates are reacting with carbon dioxide (CO2) to produce some form of calcium carbonate were not substantiated. The influence of carboxylic acid groups, however, does come into effect in the presence of lime. This suggests that lime reacts with the combustion gases to produce some form of carbonate. Basalt fines and portland cement did not have a significant effect on the ignition furnace correction factor. Additional testing should be conducted to assess the effects of fines representing other aggregates, particularly carbonates.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of Lime on Ignition Furnace Calibration


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:


    Erscheinungsdatum :

    01.01.2000




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Automated calibration station for ignition interlock devices

    LYON MICHAEL | Europäisches Patentamt | 2019

    Freier Zugriff

    Dual bottle design for ignition interlock calibration

    LYON MICHAEL | Europäisches Patentamt | 2019

    Freier Zugriff

    Automated Calibration Station for Ignition Interlock Devices

    LYON MICHAEL | Europäisches Patentamt | 2019

    Freier Zugriff

    Evaluation of Infrared Ignition Furnace for Determination of Asphalt Content

    Hurley, Graham C. / Prowell, Brian D. | Transportation Research Record | 2003