Because diesel engines operate on an efficient thermodynamic cycle at a low economic cost, their particulate pollution has been tolerated. However, the Environmental Protection Agency is now setting more stringent particulate emission standards to be met by all diesel-powered vehicles. One candidate system to meet the new EPA requirements is a continuously regenerative porous metal trap oxidizer device. A test program was initiated to evaluate the design and performance of this diesel particulate filter (DPF) on a single-cylinder diesel engine. This DPF is comprised of a rotating porous metal filter element driven by a variable speed electric motor, a heater element for filter regeneration, a nozzle for controlling the particulate deposit pattern on the filter element, a scraping device to insure proper filter regeneration, and a stainless steel housing. A 20-micrometer powder metal element and a 21-micrometer fiber metal element were tested. Collection efficiences in the 70 to 80 percent range were obtained for the optimum combination of heating and scraping for the 20-micrometer powder metal element at a pressure drop across the DPF of under 13 inches of water.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Preliminary evaluation of a porous metal diesel particulate filter


    Weitere Titelangaben:

    Bewertung eines Sintermetall-Diesel-Partikel-Filters


    Beteiligte:
    Brock, S.H. (Autor:in) / Tidona, R.J. (Autor:in) / Cernansky, N.P. (Autor:in) / Lefkowitz, L.R. (Autor:in)

    Erschienen in:

    SAE-Papers ; Nov ; 1-11


    Erscheinungsdatum :

    1989


    Format / Umfang :

    11 Seiten, 8 Bilder, 3 Tabellen, 20 Quellen


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Preliminary evaluation of porous metal diesel particulate filter

    Brock,S.H. / Tidona,R.J. / Cernansky,N.P. et al. | Kraftfahrwesen | 1989


    Preliminary Evaluation of a Porous Metal Diesel Particulate Filter

    Lefkowitz, L. R. / Cernansky, N. P. / Tidona, R. J. et al. | SAE Technical Papers | 1989


    Diesel particulate filter made of porous metal

    Yoro,K. / Itsuaki,S. / Saito,H. et al. | Kraftfahrwesen | 1998


    Diesel particulate filter made of porous metal

    Yoro, K. / Itsuaki, S. / Saito, H. et al. | Tema Archiv | 1998


    Diesel Particulate Filter Made of Porous Metal

    Saito, Hidetoshi / Yoro, Katsuhiko / Itsuaki, Satoru et al. | SAE Technical Papers | 1998