Bei trockener Witterung kommt es zum unangenehmen Effekt der Funkenentladung beim Ein- und Aussteigen aus dem Auto. Die Ursache für diesen Effekt ist statische Aufladung, verursacht durch isolierende Werkstoffe. Dies ist aber nicht der einzige Nachteil, der durch statische Aufladung verursacht wird. Es kommt auch zur Staubanziehung, die unansehnliche, zum Teil dauerhafte Staubblumen auf hochwertigen Kunststoffteilen nach sich zieht. Gemeinsam mit der Firma Volkswagen hat die Firma Clariant hier Abhilfe geschaffen und die statische Aufladung in diversen Teilen eliminiert. Unter anderen konnten die Dachkonsolen im Touran, Golf und Passat dauerhaft vor elektrostatischer Aufladung und damit vor Staubblumen geschützt werden. Um zuverlässig Staubanziehung zu vermeiden, muss ein Polymer einen spezifischen Oberflächenwiderstand kleiner 1012 Ohm aufweisen. Thermoplastische Polyurethane und besonders Polyamide haben die Eigenschaft Wasser einzulagern, dadurch sinkt der spezifische Oberflächenwiderstand des Stoffes unterhalb von 1012 Ohm. Es sind aber nicht alleine die elektrischen Eigenschaften maßgeblich für die Aufladung eines Werkstoffes. So sind z. B. die Umgebungstemperatur, die Luftfeuchtigkeit und der Verschmutzungsgrad sehr wichtige Einflussgrößen. Es gibt mehrere Möglichkeiten, ein Polymer antistatisch auszurüsten. Wir unterscheiden zwischen 3 Hauptgruppen: § Migrierende antistatische Wirkstoffe, z. B. CESA-stat Permanent antistatische Wirkstoffe, z. B. CESA-stat (permanent) Leitfähige Compounds, z. B. CESA-conductive, CESA-conductive CNT. Abhängig von der Auswahl, können verschiedene Oberflächenwiderstände erreicht werden. Lange Zeit gab es keine Alternativen zu den konventionellen, migrierenden Wirkstoffen und den leitfähigen Compounds. Diese Lücke wurde aber in den letzten Jahren durch intrinsisch dissipative Polymere (IDP), einen permanent antistatischen Wirkstoff, gefüllt. Mit diesen Wirkstoffen ist es möglich, eine große Vielfalt von Kunststoffen dauerhaft antistatisch auszurüsten. Das Additiv bildet bei der Einarbeitung ein drei dimensionales Netzwerk, welches elektrische Ladungen entlang der IDP-Kette transportieren kann. Im Gegensatz zu den migrierenden Stoffen wird der Kunststoff nicht nur an der Oberfläche antistatisch, sondern auch im Volumen. Die Ableitung von Ladungen kann also auch durch den Kunststoff erfolgen. Die Produkte lassen sich nicht abwaschen und sind selbst bei Abrieb noch aktiv. Durch die Farbneutralität und den farblosen Abrieb haben Sie einen großen Vorteil gegenüber den meist schwarzen leitfähigen Compounds.

    In dry weather, an unpleasant effect, spark discharge takes place when getting into and out of the car. The reason for this effect is static charge caused by insulating materials. This is not the only disadvantage caused by static charge, however. Dust is also attracted, resulting in ugly, sometimes lasting dust patterns on high-quality plastics components. Jointly with Volkswagen, the Clariant Company has found a solution and eliminated the static charge in various components. For instance, the ceiling consoles in the Touran, Golf and Passat models could be permanently protected against electrostatic charging and thus from forming dust patterns. In order to reliably avoid attracting dust, a polymer has to exhibit less than 1012 ohms surface resistivity. Thermoplastic polyurethanes and especially polyamides characteristically store water, whereby their surface resistivity falls below 1012 ohms. But electrical properties alone do not determine the charge in a material. Ambient temperature, humidity and degree of soiling, for instance, are very important parameters. There are several ways to modify a polymer antistatically. We distinguish among 3 main groups: Migrating antistatic additives, e.g. CESA-stat, Permanent antistatic additives, e.g. CESA-stat (permanent), Conductive compounds, e.g. CESA-conductive, CESA-conductive CNT. Different surface resistivities can be obtained depending on the selection. For a long time there was no alternative to conventional, migrating additives and conductive compounds. However, this gap has been closed in recent years by intrinsically dissipative polymers (IDP) filled with permanently antistatic additives. With these additives it is possible to antistatically modify a large variety of polymers permanently. As it works in, the additive forms a three-dimensional network capable of carrying electrical charges along the IDP chain. Compared to migrating materials, the polymer does not just become antistatic on its surface, but in its mass as well. Charges can thus also dissipate through the polymer. The products cannot wash off and are active even under abrasion. Thanks to color neutrality and colorless abrasion, they have a great advantage over most black conductive compounds. By targeted adaptation, CESA-stat (permanent) was harmonized with the various polymers; even complex geometries could be injection molded successfully. After the console frame and drawer had been modified, dust patterns continued to show up on the interior of the drawer. Not until the inlay mat made from thermoplastic elastomer (SEBS, PP-EPDM) had been modified, could the problem be completely solved. We thus see that an entire system has to be antistatically modified. If individual components within the system still insulate, dust continues to be attracted


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Wirkungsweise und Anwendungsgebiete von Permanent-Antistatika in thermoplastischen Polymeren. Vermeidung von elektrostatischer Aufladung im Automobil


    Weitere Titelangaben:

    Function and application areas for permanent antistatics. Avoiding electrostatic charges in automobiles


    Beteiligte:
    Kolditz, Pirko (Autor:in) / Luhmann, Ralf (Autor:in)


    Erscheinungsdatum :

    2008


    Format / Umfang :

    24 Seiten, 14 Bilder, 1 Tabelle


    Anmerkungen:

    (engl. Version S. 95-106)



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Deutsch , Englisch