The main focus at the reliability evaluation was to find out the performance of dice mounted in CoB technology under endurance and electrical conditions, that simulate the qualification stress level for a space mission. The results demonstrated that CoB is a reliable assembly technology. After selecting appropriate stress conditions during the testing, no catastrophic failure throughout the entire evaluation could be generated. The observed degradations were component type dependent. It is therefore recommended to verify the compatibility of the CoB technology on each new part type not covered by existing data. The evaluation however demonstrated on the other hand that the CoB technology is very sensitive regarding thermal aspects, when the technology has to work under high power conditions. Local temperature effects must be considered by the design. New derating requirements must be established for each family of devices. Other aspects, which are also critical in hybrid type of technologies must be considered in the CoB technology as well. For example bonding distribution over active areas and current-driving pads has to be carefully selected for the design of CoB assemblies. Diodes with low forward voltage are an example of this case.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Reliability evaluation of components for the chip on board (CoB) technology in space application


    Weitere Titelangaben:

    Zuverlässigkeitsbewertung der Komponenten für die Chip-on-board-Technologie (CoB) bei Raumfahrtanwendungen


    Beteiligte:
    Liebler, T. (Autor:in) / Stadler, B. (Autor:in) / Kachel, R. (Autor:in)


    Erscheinungsdatum :

    2002


    Format / Umfang :

    5 Seiten, 11 Bilder, 1 Tabelle




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Reliability evaluation of components for the Chip on Board (CoB) technology in space application

    Liebler, T. / Stadler, B. / Kachel, R. et al. | British Library Conference Proceedings | 2002


    Preliminary Reliability Evaluation of Flip Chip on Flex Interconnect Technology

    Virmani, N. / Shaw, J. / European Space Agency | British Library Conference Proceedings | 1997


    Preliminary Reliability Evaluation of Flip Chip on Flex Interconnect Technology

    Virmani, N. / Shaw, J. | British Library Online Contents | 1997


    Reliability considerations of flip chip components for automotive electronic applications

    Sugiyama, K. / Bansaku, I. / Tsuzimoto, N. et al. | Tema Archiv | 1981


    Reliability Analysis of Advanced Space Propulsion Components

    Rajagopal, K. R. / DebChaudhury, A. / Newell, J. F. | British Library Online Contents | 1993