A novel device that combines physical separation methods with biotechnology to treat oily bilgewater is described.Labaratory and pilot-scale experiments were performed to examine the ability of this device, tradenamed PetrolLiminatorTM, to both separate free oils and biodegrade the dissolved emulsified oil from shipboard bilgewater.Laboratory experiments were conducted to isolate and enrich bilge oil-degrading microorganisms. These microbes were grown in specially formulated liquid nutrients containing several hundred partsd per million (ppm) of bilge oil as the sole carbon source. These cultures were inoculated into a laboratory-scale aqueous fixed-film bioreactor for determination of the required flow rate (i.e. hydraulic retention time) to remove >=99% of the petroleum hydrocarbons in the bilgewater. This information was incorporated into the design and operation of a 500 gal pilot-scale bioreactor installed aboard the 700 ft Cape Lobos MARAD motor vessel. The bioreactor was operated for 70 days processing more than 90000 liters of petroleum hydrocarbon (PHC) contaminated bilgewater. The average PHC concentration in the untreated influent was 70 to 90 ppm. The total petroleum hydrocarbon (TPH) levels in all treated effluent samples analyzed were well below 15 ppm, the U.S. Coast Guard (USCG) limit for legal overboard discharge. In fact, the removal efficiencies for the system were greater than 99% with no operational of maintenance problem noted. A newer model was developed that incorporated a physical separation chamber (Stage 1) upstream of the bioreactor chamber (Stage 2) in order to minimize the oil load to the microbes. A series of tests was conducted that closely mimicked the USCG tests for oil/water separators (OWS). The results were dramatic. The PCH levels of the effluent were below 15 ppm in all samples analyzed for the specifical flow rate. Based on this data it is estimated that the subject system with a footprint of 6 x 5 x 5 ft (L x W x H) is able to treat up to 86000 gal of oily bilgewater per month. This system was USCG and International Maritime Organization (IMO) approved in January 2000.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Novel oil/water separator for treatment of oily bilgewater


    Weitere Titelangaben:

    Neuer Öl-Wasser-Separator für die Behandlung von ölhaltigem Bilgewasser


    Beteiligte:
    Caplan, J.A. (Autor:in) / Newton, C. (Autor:in) / Kelemen, D. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2000


    Format / Umfang :

    5 Seiten, 4 Bilder



    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Oily Water Separator

    YANG SEUNG JIN | Europäisches Patentamt | 2019

    Freier Zugriff

    Oily water separator for tanker and cargo ship

    Engineering Index Backfile | 1967



    Hydrocarbon removal from bilgewater by a combination of air-stripping and photocatalysis

    Cazoir, D. / Fine, L. / Ferronato, C. et al. | Tema Archiv | 2012


    Factors affecting bilge water properties and oily water separator system performance

    Alper, H. / Institute of Marine Engineering, Science and Technology | British Library Conference Proceedings | 2006