A program was undertaken to determine a workable design for an 8-hour life lead chloride-magnesium seawater activated battery for use in the AN/SSQ53 sonobuoy. The major effort consisted of design and fabrication of prototype samples for testing followed by production of 50 samples for delivery to the Naval Air Development Center for evaluation. Results of these tests indicated that the battery design met all specification requirements with the exception of the minimum voltage of 11.0 volts at 180 seconds of discharge for batteries tested in 0C-1.5 % salinity seawater. Voltage readings at 180 seconds of 4 samples tested cold ranged from 10.75 volts to 10.96 volts. This unreliable activation performance can be attributed to a high discharge current density (55 ma/sq.in.) in conjunction with variability in lead chloride cathode processing. It is recommended that additional volume be allowed for the battery, if possible, to reduce discharge current densily to the range of 40-50 ma/sg in Additional effort is also required to optimize the design and processing parameters of the lead chloride cathode. (Kursetz)


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    An 8-hour AN/SSQ 53 lead chloride magnesium battery


    Weitere Titelangaben:

    Betriebsverhalten einer Bleichlorid-Magnesium-Batterie mit achtstuendiger Betriebsdauer fuer die AN/SSQ 53 Schallboje


    Beteiligte:
    Jordan, A.W. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    1976


    Format / Umfang :

    18 Seiten


    Medientyp :

    Report


    Format :

    Print


    Sprache :

    Englisch






    Starter, battery and ampere hour

    Gory, G. | Engineering Index Backfile | 1930


    Ampere-Hour Meter For Rechargeable Battery

    Tripp, John S. / Schott, Timothy D. / Tcheng, Ping | NTRS | 1993