Aiming to address the issue of easily damaged “glass plate” during the demoulding process, especially for the large-sized “glass plate” that requires the cooperation of multiple individuals, the pass rate remains low. Thus, an automatic “glass plate” demoulding equipment has been designed. It is mainly composed of a round tray lifting device, a conveying device, and a demoulding device. The control process is achieved through PLC combined with metal access switch and a Human Machine interaction interface. The most productive “glass plate” of 250-outer diameter model and the most difficult demoulding of 380-outer diameter model, were chosen to carry out the experiments for analyzing the performance of demoulding equipment. The results showed that the pass rate of the 250 model “glass plate” was 95% for clamping the glass plate at a speed of 0.10 m/s and loosing the glass plate at a speed of 0.35 m/s in a three-dimensional horizontal direction. In addition, when the pressure value of the hydraulic forming machine for the 380 model “glass plate” increased by 1.5 times, the pass rate has risen from less than 40–90%. This adjustment essentially meets the requirements for automated demoulding of the “glass plate”.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design and Experiment of “Glass Plate” Automatic Demoulding Equipment


    Weitere Titelangaben:

    Lect.Notes Mechanical Engineering


    Beteiligte:
    Mo, John P. T. (Herausgeber:in) / Gao, Mingjie (Autor:in) / Ji, Mingdong (Autor:in) / Zheng, Yuqing (Autor:in) / Ma, Zhiyong (Autor:in) / Cai, Jiabin (Autor:in)

    Kongress:

    International Conference on Mechanical, Automotive and Materials Engineering ; 2023 ; Da Nang, Vietnam December 20, 2023 - December 22, 2023



    Erscheinungsdatum :

    25.09.2024


    Format / Umfang :

    15 pages





    Medientyp :

    Aufsatz/Kapitel (Buch)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Tool structure for demoulding engine nozzle diffuser

    WANG HUIMIN / WANG QISONG / CHEN MING et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Method for demoulding and turning of concrete prefabricated column

    DENG SHUANG / YU ZHIGANG / ZENG JIE et al. | Europäisches Patentamt | 2021

    Freier Zugriff

    High-speed railway track slab demoulding transfer device and application thereof

    CHEN XIAOPENG / JIA YOUQUAN / WANG DONGLI et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Automatic rotating stand equipment for glass cover plate

    WANG SHIJIA / WANG SHIBO | Europäisches Patentamt | 2021

    Freier Zugriff

    Automatic glass sheet stacking equipment

    ZENG MIN | Europäisches Patentamt | 2021

    Freier Zugriff