Under the excitation of an engine, an exhaust system vibrates, and the vibrational energy is transmitted to the vehicle body through the exhaust mounts. The transmitted energy makes contribution to the vibration of the body, which in turn increases the overall vehicle noise level. Noise contributed by the exhaust can be eliminated up to a certain level by reducing the force transmitted through the exhaust mounts. In this study, an objective function, which represents the force transmitted through the exhaust mounts, is defined. The aim is to minimise the transmitted force to achieve better vibration isolation. First, structural dynamic analysis of the vehicle exhaust system is evaluated using computational and experimental procedures. The finite element model of the exhaust system is complemented and validated by following an experimental modal analysis procedure. In the correlation procedure, it is observed that boundary conditions of the exhaust system have significant effects on the results. Hence, the definitions and the assumptions of boundary conditions are studied in detail to achieve a better correlation between the computational and the experimental models. Then, the validated computational model is used for optimisation studies. Moreover, a mass is attached to the exhaust system to reduce the forces transmitted to the vehicle body. For the optimisation problem, the stiffness and the location of exhaust mounts and the weight and the location of hanging mass are defined as design variables. Significant improvements are achieved compared to the initial design.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Reducing force transmission through exhaust mounts of a vehicle


    Beteiligte:


    Erscheinungsdatum :

    01.09.2019


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Transmission loss through mounts connected double wall lightweight structures

    Legault, Julien / Atalia, Noureddine | Tema Archiv | 2009


    SUSPENSION MOUNTS FOR A VEHICLE

    SHANTZ JEFF | Europäisches Patentamt | 2020

    Freier Zugriff

    Suspension mounts for a vehicle

    SHANTZ JEFF | Europäisches Patentamt | 2025

    Freier Zugriff

    PNEUMATICALLY TUNED VEHICLE POWERTRAIN MOUNTS

    MATHAI THOMAS / DAKHLALLAH HASSAN / KING NIGEL et al. | Europäisches Patentamt | 2016

    Freier Zugriff

    Suspension mounts for a vehicle

    SHANTZ JEFF | Europäisches Patentamt | 2022

    Freier Zugriff