Ducted fuel injection (DFI) has been proposed as a strategy to enhance the fuel/charge gas mixing within the combustion chamber of a direct-injection mixing-controlled compression ignition engine. The concept involves injecting each fuel spray through a small tube within the combustion chamber to facilitate the creation of a leaner mixture in the autoignition zone, relative to a conventional free-spray configuration (i.e., a fuel spray that is not surrounded by a duct). While previous experiments demonstrated that DFI lowers both soot incandescence and soot mass in a constant-volume combustion vessel with a single-component normal-alkane fuel (n-dodecane), this study provides the first evidence that the technology provides similar benefits in an engine application using a commercial diesel fuel containing ~30 wt% aromatics. The present study investigates the effects on engine-out emissions and efficiency with a two-orifice injector tip for charge gas mixtures containing 16 and 21 mol% oxygen. The result is that DFI is confirmed to be effective at curtailing engine-out soot emissions. It also breaks the tradeoff between emissions of soot and nitrogen oxides (NOx) by simultaneously attenuating soot and NOx with increasing dilution.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Using Ducted Fuel Injection to Attenuate Soot Formation in a Mixing-Controlled Compression Ignition Engine


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2019-05-10


    Format / Umfang :

    14 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Modeling Fuel-Air Mixing, Combustion and Soot Formation with Ducted Fuel Injection Using Tabulated Kinetics

    Lucchini, Tommaso / Zhou, Qiyan / D'Errico, Gianluca et al. | British Library Conference Proceedings | 2022


    Modeling Fuel-Air Mixing, Combustion and Soot Formation with Ducted Fuel Injection Using Tabulated Kinetics

    Severgnini, Davide / D'Errico, Gianluca / Zhou, Qiyan et al. | SAE Technical Papers | 2022


    Early Investigation of Ducted Fuel Injection for Reducing Soot in Mixing-Controlled Diesel Flames

    Koci, Chad / Martin, Glen / Svensson, Kenth et al. | SAE Technical Papers | 2018


    Ducted Fuel Injection: A Numerical Soot-Targeted Duct Geometry Optimization

    Vassallo, Alberto / Bianco, Andrea / Piano, Andrea et al. | SAE Technical Papers | 2021


    Soot formation in ducted turbulent diffusion flames

    NEILL, T. / KENNEDY, I. M. | AIAA | 1991