THE author compares tread-wear of front and rear tires. Considering wear of rear tires as normal wear he analyses the abnormal wear observed on front tires and traces it to its causes, which are found to be camber, toe-in and imperfect geometrical layout of steering-arms and linkages.A theory of the scuffing action is developed. It is due partly to various rolling diameters at different parts of the tire tread and partly to the setting of the two front wheels so they tend to roll in slightly different directions. Reducing the camber angle to ¾ deg. and the toe-in to 1/16 in., reduces both these errors and results in longer tire-wear.No definite theory for camber is found. Toe-in depends on camber, counteracting the tendency of cambered wheels to diverge. A method is described for testing accuracy of rolling action by means of paper on a greased floor.Service stations must be put in a position to test and correct toe-in and camber. Fine tie-rod adjustment should be provided in the design, and factory engineers should recommend only accurate and foolproof gages for this work.Except for difference in degree these problems are alike on all classes of automotive vehicles and with all types of tires. Standardized settings of camber and toe-in would be very desirable.Experience with “camber wear” is described in the discussion. An adjustable and graduated model for studying the effects of pitch, toe-in, camber, and caster is described and illustrated. Conclusions are drawn agreeing with those in the paper.THE author compares tread-wear of front and rear tires. Considering wear of rear tires as normal wear he analyses the abnormal wear observed on front tires and traces it to its causes, which are found to be camber, toe-in and imperfect geometrical layout of steering-arms and linkages.A theory of the scuffing action is developed. It is due partly to various rolling diameters at different parts of the tire tread and partly to the setting of the two front wheels so they tend to roll in slightly different directions. Reducing the camber angle to ¾ deg. and the toe-in to 1/16 in., reduces both these errors and results in longer tire-wear.No definite theory for camber is found. Toe-in depends on camber, counteracting the tendency of cambered wheels to diverge. A method is described for testing accuracy of rolling action by means of paper on a greased floor.Service stations must be put in a position to test and correct toe-in and camber. Fine tie-rod adjustment should be provided in the design, and factory engineers should recommend only accurate and foolproof gages for this work.Except for difference in degree these problems are alike on all classes of automotive vehicles and with all types of tires. Standardized settings of camber and toe-in would be very desirable.Experience with “camber wear” is described in the discussion. An adjustable and graduated model for studying the effects of pitch, toe-in, camber, and caster is described and illustrated. Conclusions are drawn agreeing with those in the paper.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Effect of Wheel-Setting on Wear of Pneumatic Tires


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    HALE, J. E. (Autor:in)

    Kongress:

    Pre-1964 SAE Technical Papers ; 1906



    Erscheinungsdatum :

    01.01.1927




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    The effect of wheel-setting on wear of pneumatic tires

    Hale, J.E. | Engineering Index Backfile | 1927


    Wear of pneumatic tires

    Engineering Index Backfile | 1935


    Air-wheel type pneumatic tires

    Musselman, A.J. | Engineering Index Backfile | 1930


    Wheel assemblies with non-pneumatic tires

    SCHAEDLER AXEL / BUCHANAN PETER J | Europäisches Patentamt | 2021

    Freier Zugriff

    WHEEL ASSEMBLIES WITH NON-PNEUMATIC TIRES

    SCHAEDLER AXEL / BUCHANAN PETER J | Europäisches Patentamt | 2018

    Freier Zugriff