Truck chassis assembly forms the structural backbone of a heavy commercial vehicle. The main function of the truck chassis is to support the aggregate components and payload acting on it during operating conditions. The chassis is subjected to vertical loading (Bump), fore and aft loading (braking and acceleration), lateral loading (Cornering) and torsional loading (Articulation). Out of the above load cases, the vertical load (bump load) decides the maximum load carrying capacity of the chassis when the vehicle traverses uneven surfaces. This paper explains the importance of theoretical bending stress calculation of truck frame side member (FSM) subjected to vertical load which will help the designer to arrive at the major section of FSM during initial stage of the design. Different concept proposals of FSM can be evaluated using these calculations quickly. Based on the experience in validation of Finite Element analysis results of similar type of vehicles with test results, the calculated theoretical bending stresses are compared with those obtained from numerical analysis. Finite element method (FEM) is applied for the numerical analysis of truck chassis assembly using commercial software MSC/Nastran.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Theoretical Evaluation and Finite Element Analysis of Commercial Truck Chassis Assembly


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2013 World Congress & Exhibition ; 2013



    Erscheinungsdatum :

    2013-04-08




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Theoretical Evaluation and Finite Element Analysis of Commercial Truck Chassis Assembly

    Sathish Kumar, P. / Balakrishnan, M. / Society of Automotive Engineers | British Library Conference Proceedings | 2013




    Finite Element Analysis of Corroded Truck Chassis Using Sub Modeling Technique

    Kurdi, O. / Rahman, R.A. / Tamin, M.N. | British Library Conference Proceedings | 2012


    Local Non-Linear Analysis of Heavy Commercial Truck Chassis Assembly Using Sub-Modeling Technique

    Mariappan, Balakrishnan / Dasi, Shashidhar | SAE Technical Papers | 2013