It has been shown recently that the acoustic performance of the extended tube expansion chambers can be improved substantially by making the extended inlet and outlet equal to half and quarter chamber lengths, duly incorporating the end corrections due to the evanescent higher order modes that would be generated at the discontinuities. Such chambers however suffer from the disadvantages of high back pressure and generation of aerodynamic noise at the area discontinuities. These two disadvantages can be overcome by means of a perforated bridge between the extended inlet and extended outlet. This paper deals with design or tuning of these extended concentric tube resonators.One dimensional control volume approach is used to analyze this muffler configuration. It is validated experimentally making use of the two source-location method. It is thus shown that the inertance of holes plays a role similar to the lumped inertance generated by evanescent 3-D modes at the terminations of the quarter wave resonators in the case of the double-tuned extended tube chambers. The effect of mean flow is also investigated. The resultant transfer matrix is then used to carry out a systematic parametric study in order to arrive at empirical expressions for the differential lengths as well as the end corrections. Thus, an extended concentric tube resonator can be tuned such that the first three troughs, that characterize the corresponding simple chamber Transmission Loss (TL) curve, may be eliminated making use of the proposed procedure. In fact, the entire TL curve at low and medium frequencies may be substantially lifted, making the tuned extended concentric tube resonator a viable design option.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Tuning of the Extended Concentric Tube Resonators


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Munjal, M. L. (Autor:in) / Chaitanya, P. (Autor:in)

    Kongress:

    SIAT 2011 ; 2011



    Erscheinungsdatum :

    19.01.2011




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Tuning of the Extended Concentric Tube Resonators

    Chaitanya, P. / Munjal, M.L. | British Library Conference Proceedings | 2011


    Fluid Dynamic and Acoustic Modeling of Concentric-Tube Resonators/Silencers

    Blaser, Dwight A. / Morel, Josette / Morel, Thomas | SAE Technical Papers | 1991


    Fluid dynamic and acoustic modeling of concentric-tube resonators/silencers

    Morel,T. / Morel,J. / Blaser,D.A. et al. | Kraftfahrwesen | 1991



    Concentric-tube differential drive

    Marlow, R. E. | NTRS | 1976