Periodic regeneration of the diesel particulate trap is essential to maintain the collection efficiency and exhaust gas hack pressure at acceptable levels. The objectives of this study are to describe the phenomenology of ceramic foam filter regeneration process and to present its mathematical model. Further simulation study is carried out to estimate the effects of various factors including fuel additive on the ignition and the filter bed temperature and to investigate conditions of excessive temperature which could result in filter destruction.The model is based on the assumption that the regeneration process is composed of two steps. The first step is the additional heat supply from the external energy source, and the second step is the spontaneous combustion propagation. The results from the analytical model agreed very well with the experimental results. Additional energy is required above normal engine operating conditions to initiate the incineration under lower exhaust gas temperature. Regeneration must be carried out within a narrow range of particulate loading to avoid the melting of the filter material. The effects of fuel additives have been estimated by using the simulation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Regenration Process of Ceramic Foam Diesel-Particulate Traps


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Takama, Kenichirou (Autor:in) / Oishi, Kiyohiko (Autor:in) / Kobashi, Kiyoshi (Autor:in) / Kogiso, Takeshi (Autor:in) / Inoue, Tokuta (Autor:in)

    Kongress:

    1984 SAE International Fall Fuels and Lubricants Meeting and Exhibition ; 1984



    Erscheinungsdatum :

    01.10.1984




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Regeneration process of ceramic foam diesel-particulate traps

    Takama,K. / Kobashi,K. / Oishi,K. et al. | Kraftfahrwesen | 1984


    Open-Pore Ceramic Foam as Diesel Particulate Filter

    Maurer, A. / Gabathuler, J.-P. / Gauckler, L. et al. | SAE Technical Papers | 1989


    Open-pore ceramic foam as diesel particulate filter

    Mizrah,T. / Maurer,A. / Gauckler,L. et al. | Kraftfahrwesen | 1989


    Diesel Particulate Reduction System using Catalyzed Ceramic Foam Filter

    Imada, Y. / Sumiya, S. / Society of Automotive Engineers of Japan | British Library Conference Proceedings | 2007


    Feasibility of Ceramic Foam as a Diesel Particulate Trap

    Tutko,J.J. / Lestz,S.S. / Dore,J.E. et al. | Kraftfahrwesen | 1984