Hydraulic systems are often subjected to pressure drops, which may lead to cavitation. In systems such as power steering, hoist loads, or ventricular assist devices, distributors are generally used. Significant pressure losses can happen in a distributor due to gap and overlap, which may lead to cavitation development. However, this issue is almost never included in the conception of the distributors. In this study, the multibubble model of the modified Rayleigh-Plesset equation is applied to the rotary distributor of an oil hydraulic system. The influence of the overlap length, the gap, the rotation speed, and distributor inlet pressure on the cavitation and particularly the interactions between bubbles at cavitation inception are studied. The study highlights a critical length of the overlap; over this value, the overlap length influences significantly the cavitation duration and the void fraction. More generally, some geometrical details have a strong influence on cavitation. Optimization of these details in engine parts, taking account the occurrence of cavitation, would be an appropriate solution to reduce its effects. The study also demonstrates that the growth of small bubbles may be delayed by the interactions with the nearby bigger ones, even if the ambient pressure is lower than their theoretical critical pressure. They eventually collapse at the first moments of the cavitation development. However, if the ambient pressure drops further, that is, beyond a critical pressure, a small bubble gains enough inertial energy to overcome these interaction phenomena and thus to grow. The growth of small bubbles increases the interactions between bubbles and slows down the growth of nearby bigger ones. The results show that the interactions between bubbles are of primary importance in the first moments of the cavitation development, which suggests that they should be taken into account in the definition of the critical pressure.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Cavitation in a hydraulic system: The influence of the distributor geometry on cavitation inception and study of the interactions between bubbles




    Erscheinungsdatum :

    2016



    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch



    Klassifikation :

    BKL:    52.35 Kolbenkraftmaschinen / 52.35




    Numerical Simulations of Cavitation Inception

    Szymczak, W. G. et al. / Direction des Constructions Navales / Bassin d'Essais des Carenes | British Library Conference Proceedings | 1995



    On the inception of cavitation

    Ling, S.C. | Tema Archiv | 1982


    An Expression of Inception Cavitation Number

    Qin, S. / National Research Council; Naval Studies Board | British Library Conference Proceedings | 1993