An integrated, generic unibody composite pressurized structure (UCPS) combined with a positive expulsion device (PED), consisting of an elastomeric bladder for monopropellant hydrazine, has been quasi-standardized for spacecraft use. The combination functions as an all-composite, non-metallic, propellant tank with bladder. The integrated UCPS combines several previous innovations - specifically, the linerless, all-composite cryogenic tank technology; all-composite boss; resin formulation; and integrated stringer system. The innovation combines the UCPS with an integrated propellant management device (PMD), the PED or bladder, to create an entirely unique system for in-space use. The UCPS is a pressure vessel that incorporates skirts, stringers, and other structures so that it is both an in-space hydrazine tank, and also a structural support system for a spacecraft in a single, all-composite unit. This innovation builds on the progress in the development of a previous SBIR (Small Business Innovation Research) Phase I with Glenn Research Center and an SBIR III with Johnson Space Center that included the fabrication of two 42-in. (≈107-cm) diameter all-composite cryogenic (LOX and liquid methane) UCPS test tanks for a lunar lander. This Phase II provides hydra zine compatibility testing of the elastomeric bladder, a see-through PED to validate the expulsion process and model, and a complete UCPS-based PED with stringers and skirts that will be used to conduct initial qualification and expulsion tests. This extends the UCPS technology to include hydrazine-based, in-space pro - pulsion applications and can also be used for electric propulsion. This innovation creates a system that, in comparison to the traditional approach, is lower in weight, cost, volume, and production time; is stronger; and is capable of much higher pressures. It also has fewer failure modes, and is applicable to both chemical and electric propulsion systems.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Unibody Composite Pressurized Structure


    Beteiligte:
    Rufer, Markus (Autor:in) / Conger, Robert (Autor:in) / Bauer, Thomas (Autor:in) / Newman, John (Autor:in)


    Erscheinungsdatum :

    01.10.2013


    Medientyp :

    Sonstige


    Format :

    Keine Angabe


    Sprache :

    Englisch





    UNIBODY HOPPER TRAILER

    MAERTENS ANDREW JOSEPH / BRACEWELL BRYAN MORRIS / KLOEPFER MICHAEL | Europäisches Patentamt | 2016

    Freier Zugriff

    Unibody hopper trailer

    MAERTENS ANDREW JOSEPH / BRACEWELL BRYAN MORRIS / KLOEPFER MICHAEL | Europäisches Patentamt | 2017

    Freier Zugriff

    Unibody Weld Quality Testing

    SAE Technical Papers | 1987


    FRONT CABIN STRUCTURE, UNIBODY, AND VEHICLE

    GAO DONG / HE BIN / GUO HUI et al. | Europäisches Patentamt | 2025

    Freier Zugriff