An experimental investigation designed to study the development of shear layers in a two-dimensional single-nozzle ejector has been completed. In this study, combinations of air/air, argon/air, helium/air, and air/helium were used as the supersonic primary and subsonic secondary, respectively. Mixing of the gases occurred in a constant-area tube 39.1 mm high by 25.4 mm wide, where the inlet static pressure was maintained at 35 kPa. The cases studied resulted in convective Mach numbers between 0.058 and 1.64, density ratios between 0.102 and 3.49, and velocity ratios between 0.065 and 0.811. The resulting data shows the differences in the shear-layer development for the various combinations of independent variables utilized in the investigation. The normalized growth-rates in the near-field were found to be similar to two-dimensional mixing layers. These results have enhanced the ability to analyze and design ejector systems as well as providing a better understanding of the physics.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Initial development of the two-dimensional ejector shear layer - Experimental results


    Beteiligte:
    Benjamin, M. A. (Autor:in) / Dufflocq, M. (Autor:in) / Roan, V. P. (Autor:in)

    Kongress:

    AIAA, SAE, ASME, and ASEE, Joint Propulsion Conference and Exhibit ; 1993 ; Monterey, CA, United States


    Erscheinungsdatum :

    01.06.1993


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch





    Initial development of the axisymmetric ejector shear layer

    DUFFLOCQ, M. / BENJAMIN, M. / ROAN, V. et al. | AIAA | 1992



    Positionable ejector member for ejector enhanced boundary layer alleviation

    KHALID SYED J | Europäisches Patentamt | 2017

    Freier Zugriff

    POSITIONABLE EJECTOR MEMBER FOR EJECTOR ENHANCED BOUNDARY LAYER ALLEVIATION

    KHALID SYED J | Europäisches Patentamt | 2016

    Freier Zugriff