The objective of this test program was to evaluate the feasibility of using a water-cooled nozzle on large solid propellant motors. The coolant requirement for this test was 1200 gal/min water flow rate with an inlet coolant pressure of 850 psi. The flow was reduced during the test with a minimum water flow rate of 560 gal/min. The nozzle performed successfully with no indication of tube burnthrough or film boiling occurring. Test duration was 62 seconds at an average chamber pressure of 380 psi. Results of this test indicated the entire system operated satisfactorily at maximum operating conditions. (Author)


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Solid Propellant Test Evaluation of Water-Cooled Nozzle


    Beteiligte:
    D. R. Zorich (Autor:in) / A. A. Bassoni (Autor:in)

    Erscheinungsdatum :

    1969


    Format / Umfang :

    48 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch