The objective of this test program was to evaluate the feasibility of using a water-cooled nozzle on large solid propellant motors. The support requirement for this second nozzle test was 1100 gal/min coolant water flow with an inlet coolant pressure of 850 psi. The nozzle was successfully tested with no indication of burn-through or film boiling occurring. Test duration was 62 seconds at an average chamber pressure of 380 psi. Results of this test indicated the entire system operated satisfactorily at maximum operating conditions. (Author)


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Demonstration Test Firing of a Water-Cooled Nozzle on a Solid Propellant Motor


    Beteiligte:
    D. R. Zorich (Autor:in) / A. A. Bassoni (Autor:in)

    Erscheinungsdatum :

    1969


    Format / Umfang :

    72 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Solid Propellant Test Evaluation of Water-Cooled Nozzle

    D. R. Zorich / A. A. Bassoni | NTIS | 1969


    Demonstration of Solid Propellant Pulse Motor Technologies

    Dahl, H. / Jones, B. / American Institute of Aeronautics and Astronautics et al. | British Library Conference Proceedings | 1996


    Demonstration of solid propellant pulse motor technologies

    Dahl, Harold / Jones, Barry | AIAA | 1996


    Flexible Exit Cone Nozzle Demonstration Firing Results

    J. R. Ellison / S. J. Ojala | NTIS | 1969