Several proposed space missions include precision reflectors that are larger in diameter than any current or proposed launch vehicle. Most of these reflectors will require a truss structure to accurately position the reflector panels and these reflectors will likely require assembly in orbit. A research program has been conducted at the NASA Langley Research Center to develop the technology required for the robotic assembly of truss structures. The focus of this research has been on hardware concepts, computer software control systems, and operator interfaces necessary to perform supervised autonomous assembly. A special facility was developed and four assembly and disassembly tests of a 102-strut tetrahedral truss have been conducted. The test procedures were developed around traditional 'pick-and-place' robotic techniques that rely on positioning repeatability for successful operation. The data from two of the four tests were evaluated and are presented in this report. All operations in the tests were controlled by predefined sequences stored in a command file, and the operator intervened only when the system paused because of the failure of an actuator command. The tests were successful in identifying potential pitfalls in a telerobotic system, many of which would not have been readily anticipated or incurred through simulation studies. Addressing the total integrated task, instead of bench testing the component parts, forced all aspects of the task to be evaluated. Although the test results indicate that additional developments should be pursued, no problems were encountered that would preclude automated assembly in space as a viable construction method.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Baseline Tests of an Autonomous Telerobotic System for Assembly of Space Truss Structures


    Beteiligte:
    M. D. Rhodes (Autor:in) / R. W. Will (Autor:in) / C. Quach (Autor:in)

    Erscheinungsdatum :

    1994


    Format / Umfang :

    46 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Baseline tests of an autonomous telerobotic system for assembly of space truss structures

    Rhodes, Marvin D. / Will, Ralph W. / Quach, Coung | NTRS | 1994





    Truss Assembly Using Autonomous Space Robot Simulator

    Senda, K. / Murotsu, Y. / Mitsuya, A. | British Library Conference Proceedings | 2000