This article studies the new benefits that partial power processing (PPP) brings to silicon (Si) devices compared to wide bandgap (WBG) technologies. To prove this, the proposed case study consists of an onboard charger (OBC) application in which a Si-based partial power converter (PPC) is compared with a silicon carbide (SiC)-based full power converter (FPC). The OBC application considers three different technologies of lithium-ion batteries and the main comparison metrics are: semiconductor switching, temperature rise of semiconductors, volume, and device losses (efficiency). This last one is oriented to energy losses (Wh) and not to power losses (W) as classical design. An analytical model is used to compute switching and conduction losses. Depending on the operating point, switching events are segregated into zero voltage switching (ZVS), incomplete ZVS (iZVS), and hard switching. It is shown that the Si-based PPC may enter non-ZVS in certain operating conditions. However, its efficiency remains above 99%, producing up to five times lower energy losses than the SiC-based FPC. Also, the case temperature of the semiconductors is halved and a reduction in the volume and electrical stress of the devices is achieved. This permits a global multiobjective optimization. The results are experimentally validated using a 3-kW prototype of SiC-based FPC and Si-based PPC.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Performance Improvement of a Silicon Partial Power Converter Over a Silicon Carbide Full Power Converter


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    01.03.2024


    Format / Umfang :

    11505078 byte




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Mobile charging pile adopting silicon carbide dual-active full-bridge direct-current converter

    CHEN CHUN / ZHUANG JIANDONG / NI YAJIA et al. | Europäisches Patentamt | 2024

    Freier Zugriff

    Efficiency Improvement of Boost Converter for Fuel Cell Bus by Silicon Carbide Diodes

    Tanida, Atsushi / Tamura, Kazutaka / Sugiura, Toshikazu | SAE Technical Papers | 2016


    Efficiency Improvement of Boost Converter for Fuel Cell Bus by Silicon Carbide Diodes

    Sugiura, Toshikazu / Tanida, Atsushi / Tamura, Kazutaka | British Library Conference Proceedings | 2016


    Extraction of parasitic parameters from silicon carbide power converter using multi-resolution analysis method

    Yin, Yitong / Oladele, Olanrewaju Kabir / Hua, Chengchao et al. | IEEE | 2017


    POWER CONVERTER ARRANGEMENT WITH PARTIAL POWER CONVERSION

    FACANHA DE OLIVEIRA EDUARDO / HERRERO AOULAD ISMAEL / GAONA DANIEL | Europäisches Patentamt | 2024

    Freier Zugriff