1–20 of 43 hits
|

    Magnesium and its alloys applications in automotive industry

    Kulekci, Mustafa Kemal | Tema Archive | 2008
    The objective of this study is to review and evaluate the applications of magnesium in the automotive industry that can significantly ...

    Fabrication of metal matrix composite automotive parts

    Ramesh, K.C. / Sagar, R. | Tema Archive | 1999
    cost-saving process. Mixtures of four different compositions (15, 20, 25, 30% by weight) of SiC were prepared. By the PM technique, valves were ...

    UV curing systems for automotive refinish applications

    Stropp, J.P. / Wolff, U. / Kernaghan, S. et al. | Tema Archive | 2006
    The combination of the UV flash equipment, which generates UV flashes in short intervals with a high and homogenous energy density, with UV ...
    Keywords: Automobil

    Improvement of hydrogen storage properties of the AB2 Laves phase alloys for automotive application

    Kandavel, M. / Bhat, V.V. / Rougier, A. et al. | Tema Archive | 2008
    Hydrogen storage properties of the Ti(1.1)CrMn AB2-type Laves phase alloys, for both low (-30 deg C) and high (80 deg C ...

    Effect of nano layered silicates on automotive polyurethane refinish clear coat

    Ahmadi, Behdad / Kassiriha, Mahmoud / Khodabakhshi, Khosrow et al. | Tema Archive | 2007
    In the present investigation, effect of nano layered silicates on the properties of an automotive refinish clear coat based on polyurethane ...

    Failure mechanisms of automotive metallic alloys in very high cycle fatigue range

    Bayraktar, Emin / Garcias, Israel Marines / Bathias, Claude | Tema Archive | 2006
    In modern technology, analysis of fatigue behaviour of engineering components is obligatory to develop engines and mechanical parts to ...

    A numerical and experimental study of surface deflections in automobile exterior panels

    Park, C.D. / Chung, W.J. / Kim, B.M. | Tema Archive | 2007
    Surface deflections have a great effect on the external appearance of automobiles. Usually, they are occurred on large flat panels ...

    Wear behaviour of A356/25SiCp aluminium matrix composites sliding against automobile friction material

    Natarajan, N. / Vijayarangan, S. / Rajendran, I. | Tema Archive | 2006
    In the present paper, the wear behaviour of aluminium metal matrix composite (Al MMC) sliding against automobile friction material has been ...

    Development of recyclable self-reinforced polypropylene parts for automotive applications

    Weager, Brendon M. / Bishop, G.R. / Black, A.C. et al. | Tema Archive | 2007
    applied succesfully. The technology has been demonstrated in two automotive case studies - an exterior panel for the Lotus Elise and an interior ...

    Applications and case studies of laser hybrid welding in the automotive industry

    Staufer, H. | Tema Archive | 2010
    processes allow a wide field of application in the joining technology. New possibilities and synergetic effects, however, are based on the ...

    Automotive friction materials evolution during the past decade

    Jacko, M.G. / Tsang, P.H.S. / Rhee, S.K. | Tema Archive | 1984
    Keywords: KRAFTWAGEN

    Application of hot press forming process to manufacture an automotive part and its finite element analysis considering phase transformation plasticity

    Lee, Myoung-Gyu / Kim, Sung-Joon / Han, Heung-Nam et al. | Tema Archive | 2009
    forming technique. By this technique, significant increase of strength through quenching of heated high carbon SK5 steel sheet and higher ...

    A smart sensor for compression measurement in automotive textiles

    Drean, Emilie / Schacher, Laurence / Adolphe, Dominique et al. | Tema Archive | 2007
    textiles could find applications in the automotive field, to measure accurately the mass of a passenger. The influence of the external parameters ...

    A study of the frictional characteristics of metal and ceramic counterfaces against electro-deposited coatings for use on automotive seat rails

    Kim, Kyungmok | Tema Archive | 2014
    An investigation was conducted on the friction coefficient changes when ceramic balls oscillate against a series of epoxy-based cathodic ...

    Coated glass in the automotive industry

    Manfre, G. | Tema Archive | 1991

    Chemical depth profiling of multi-layer automotive coating systems

    Adamsons, K. | Tema Archive | 2002
    Detailed chemical analysis of high performance automotive coating systems can be done with a relatively available and affordable set of ...

    A fundamental tribochemical study of the third body layer formed during automotive friction braking

    Wirth, A. / Eggleston, D. / Whitaker, R. | Tema Archive | 1994
    The chemical nature of the transfer film (TF) or third body layer (TBL) formed at the friction interface during automotive friction braking ...

    Tribological properties of automotive disc brakes with solid lubricants

    Gudmand-Hoyer, L. / Bach, A. / Nielsen, G.T. et al. | Tema Archive | 1999
    In automotive brake systems, high temperatures and pressures are generated at the contacting surfaces. This affects the pad and disc ...

    Research on Surface Treatment Coating on Titanium Alloy Based on Laser Cladding Technology

    al Muin, Abdullah / Chand, Dharmahinder Singh / Malhi, Gurmail Singh et al. | SAE Technical Papers | 2023
    proportional to the coating structure. This research has practical value in the modern aerospace and automobile industry to increase the application of ...
    Publisher: Society of Automotive Engineers , SAE International