1–20 of 20 hits
|

    UV curing systems for automotive refinish applications

    Stropp, J.P. / Wolff, U. / Kernaghan, S. et al. | Tema Archive | 2006
    The combination of the UV flash equipment, which generates UV flashes in short intervals with a high and homogenous energy density, with UV ...
    Keywords: Automobil

    A numerical and experimental study of surface deflections in automobile exterior panels

    Park, C.D. / Chung, W.J. / Kim, B.M. | Tema Archive | 2007
    Surface deflections have a great effect on the external appearance of automobiles. Usually, they are occurred on large flat panels ...

    A smart sensor for compression measurement in automotive textiles

    Drean, Emilie / Schacher, Laurence / Adolphe, Dominique et al. | Tema Archive | 2007
    textiles could find applications in the automotive field, to measure accurately the mass of a passenger. The influence of the external parameters ...

    Chemical depth profiling of multi-layer automotive coating systems

    Adamsons, K. | Tema Archive | 2002
    Detailed chemical analysis of high performance automotive coating systems can be done with a relatively available and affordable set of ...

    Tribological properties of automotive disc brakes with solid lubricants

    Gudmand-Hoyer, L. / Bach, A. / Nielsen, G.T. et al. | Tema Archive | 1999
    In automotive brake systems, high temperatures and pressures are generated at the contacting surfaces. This affects the pad and disc ...

    Research on Surface Treatment Coating on Titanium Alloy Based on Laser Cladding Technology

    al Muin, Abdullah / Chand, Dharmahinder Singh / Malhi, Gurmail Singh et al. | SAE Technical Papers | 2023
    proportional to the coating structure. This research has practical value in the modern aerospace and automobile industry to increase the application of ...
    Publisher: Society of Automotive Engineers , SAE International

    Novel instrumentation for evaluating stone impact wear of automotive paint systems

    Ramamurthy, A.C. / Buresh, G.A. / Nagy, M. et al. | Tema Archive | 1999
    Stone impact damage to painted automotive exteriors is an area of significant concern both to the automobile manufacturer and the paint ...
    Keywords: Automobil

    Ambient cure high solids acrylic resins for automotive refinish clear coat applications

    Petit, H. / Henry, N. / Krebs, A. et al. | Tema Archive | 2001
    There is nowadays an increasing demand for low VOC systems in automotive refinish industry. These systems should also cure sufficiently ...

    Friction induced damage: preliminary numerical analysis of stresses within painted automotive plastics induced by large curvature counterfaces

    Mihora, D.J. / Ramamurthy, A.C. | Tema Archive | 1997
    Surface damage in modern plastic automotive fascias (bumpers) arises as a result of numerous physical sliding contact scenarios. The most ...

    Influence of Hot Extrusion Process on Tensile Properties and Microstructures of Aluminium 6061 Hybrid Composite

    Adarsha, H. / Suresh Kumar, R. / Suryanarayana, Ramesh Chinnakurli et al. | SAE Technical Papers | 2023
    In this research, the aim is to investigate the tensile properties and microstructures of Aluminium 6061 hybrid composite before and after ...
    Publisher: Society of Automotive Engineers , SAE International

    Effect of Shot Peening Exposure Time on Mechanical Behavior of Al 7075-T6 Alloy

    Gaddam, Bhanodaya Reddy / Palampalle, Bhanu / Jagannati, Venumurali | SAE Technical Papers | 2020
    This investigation addresses the effect of exposure time applied through shot peening as one of the severe plastic deformation technique on ...
    Publisher: Society of Automotive Engineers , SAE International

    The Effect of TiB2 on Mechanical and Microstructural Properties of AZ91 Matrix Composites Manufactured by Cold Chamber Die Casting Process

    P, Ponnusamy / M, Prakash / R, Senthilkumar | SAE Technical Papers | 2020
    by cold chamber die casting process technique. The microstructure, density, hardness, mechanical properties of the specimens was investigated ...
    Publisher: Society of Automotive Engineers , SAE International

    Development of Zinc and Low Carbon Steel Coatings on ABS Plastic by Electric ARC Spraying

    R, Keshavamurthy / G Koppad, Praveennath / Suryanarayana, Ramesh Chinnakurli et al. | SAE Technical Papers | 2022
    steel. In the light of the above, the current work employs an electric arc spray technique to coat zinc and low carbon steel on ABS plastic ...
    Publisher: Society of Automotive Engineers , SAE International

    Deformation behavior of Al-Mg-Si alloy at the elevated temperature

    Kwon, Y.N. / Lee, Y.S. / Lee, J.H. | Tema Archive | 2007
    Al-Mg-Si alloy is one of the most popular materials for light-weight automotive components production. Forging and extrusion are the usual ...

    Severe plastic deformation of the magnesium alloy AZ31

    Mueller, K. / Mueller, S. | Tema Archive | 2007
    Although light weight constructions ar an important issue in the automobile and aerospace industry, extruded magnesium profiles are not ...

    Influence of surface texture on orange peel in aluminum

    Lee, P.S. / Piehler, H.R. / Adams, B.L. et al. | Tema Archive | 1998
    To investigate the surface finish and roughening behaviour of aluminum alloys, we combine the automated analysis of electron back scattered ...

    Configurations of large capacity ultrasonic complex vibration sources with complex transverse vibration rods and a disk with multiple transducers

    Tsujino, Jiromaru / Ueoka, Tetsugi / Kikuchi, Yuya | Tema Archive | 2006
    normal plane to the axial direction of the system for welding of large specimens such as automobile bodies. The configuration of a 27 kHz and a ...

    Safety distances: Definition and values

    Marangon, A. / Carcassi, M. / Engeboe, A. et al. | Tema Archive | 2007
    In order to facilitate the introduction of a new technology, as is the utilization of hydrogen as an energy carrier, development of safety ...

    Friction induced paint damage - A novel method for objective assessment of painted engineering plastics

    Ramamurthy, A.C. / Charest, J.A. / Lilly, M.D. et al. | Tema Archive | 1997
    Engineered injection molded plastics are now common substrates of choice for painted bumper fascias in the automotive industry. A major ...