1–20 of 43 hits
|

    A fundamental tribochemical study of the third body layer formed during automotive friction braking

    Wirth, A. / Eggleston, D. / Whitaker, R. | Tema Archive | 1994
    The chemical nature of the transfer film (TF) or third body layer (TBL) formed at the friction interface during automotive friction braking ...

    Ambient cure high solids acrylic resins for automotive refinish clear coat applications

    Petit, H. / Henry, N. / Krebs, A. et al. | Tema Archive | 2001
    There is nowadays an increasing demand for low VOC systems in automotive refinish industry. These systems should also cure sufficiently ...

    An experimental and numerical investigation into the dynamic crash testing of vehicle bumper fabricated using friction stir welding and gas metal arc welding

    Baratzadeh, Farzad / Tay, Yi-Yang / Patil, Sachin et al. | Tema Archive | 2014
    The advancement in friction stir welding (FSW) technology has provided automotive and aerospace industry with an alternative method in ...

    A numerical and experimental study of surface deflections in automobile exterior panels

    Park, C.D. / Chung, W.J. / Kim, B.M. | Tema Archive | 2007
    Surface deflections have a great effect on the external appearance of automobiles. Usually, they are occurred on large flat panels ...

    Application of hot press forming process to manufacture an automotive part and its finite element analysis considering phase transformation plasticity

    Lee, Myoung-Gyu / Kim, Sung-Joon / Han, Heung-Nam et al. | Tema Archive | 2009
    forming technique. By this technique, significant increase of strength through quenching of heated high carbon SK5 steel sheet and higher ...

    Application of the thermostatic mobile device for phosphating steel and aluminium used in the automotive industry

    Vite-Torres, J. / Villalfranco-Ruiz, J. / Olea-Cardozo, O. et al. | Tema Archive | 2005
    apply the phosphate solution on metallic substrates used in the automotive industry. This process was carried out without the use of a dip cell ...

    Applications and case studies of laser hybrid welding in the automotive industry

    Staufer, H. | Tema Archive | 2010
    processes allow a wide field of application in the joining technology. New possibilities and synergetic effects, however, are based on the ...

    A smart sensor for compression measurement in automotive textiles

    Drean, Emilie / Schacher, Laurence / Adolphe, Dominique et al. | Tema Archive | 2007
    textiles could find applications in the automotive field, to measure accurately the mass of a passenger. The influence of the external parameters ...

    A study of the frictional characteristics of metal and ceramic counterfaces against electro-deposited coatings for use on automotive seat rails

    Kim, Kyungmok | Tema Archive | 2014
    An investigation was conducted on the friction coefficient changes when ceramic balls oscillate against a series of epoxy-based cathodic ...

    Automotive friction materials evolution during the past decade

    Jacko, M.G. / Tsang, P.H.S. / Rhee, S.K. | Tema Archive | 1984
    Keywords: KRAFTWAGEN

    Behaviour characterization of polymeric foams over a large range of strain rates

    Zhao, H. / Gary, G. | Tema Archive | 2002
    The testing and modelling of the mechanical behaviour of some polymeric foams involved in the automotive industry are presented. A variety ...

    Chemical depth profiling of multi-layer automotive coating systems

    Adamsons, K. | Tema Archive | 2002
    Detailed chemical analysis of high performance automotive coating systems can be done with a relatively available and affordable set of ...

    Coated glass in the automotive industry

    Manfre, G. | Tema Archive | 1991

    Configurations of large capacity ultrasonic complex vibration sources with complex transverse vibration rods and a disk with multiple transducers

    Tsujino, Jiromaru / Ueoka, Tetsugi / Kikuchi, Yuya | Tema Archive | 2006
    normal plane to the axial direction of the system for welding of large specimens such as automobile bodies. The configuration of a 27 kHz and a ...

    Crashworthiness of composite inserts in vehicle structure

    Park, Chung-Kyu / Kan, Cing-Dao- / Reagan, Steven et al. | Tema Archive | 2012
    Composite inserts are a well-known and innovative technology in the automotive industry used to improve safety, NVH (noise, vibration, and ...

    Deformation behavior of Al-Mg-Si alloy at the elevated temperature

    Kwon, Y.N. / Lee, Y.S. / Lee, J.H. | Tema Archive | 2007
    Al-Mg-Si alloy is one of the most popular materials for light-weight automotive components production. Forging and extrusion are the usual ...

    Development of recyclable self-reinforced polypropylene parts for automotive applications

    Weager, Brendon M. / Bishop, G.R. / Black, A.C. et al. | Tema Archive | 2007
    applied succesfully. The technology has been demonstrated in two automotive case studies - an exterior panel for the Lotus Elise and an interior ...

    Development of Zinc and Low Carbon Steel Coatings on ABS Plastic by Electric ARC Spraying

    R, Keshavamurthy / G Koppad, Praveennath / Suryanarayana, Ramesh Chinnakurli et al. | SAE Technical Papers | 2022
    steel. In the light of the above, the current work employs an electric arc spray technique to coat zinc and low carbon steel on ABS plastic ...
    Publisher: Society of Automotive Engineers , SAE International