Silicon-aluminium alloys (Al-Si), with Si contents up to 20%, are important materials in automotive and aeronautical industries due to their low density and high wear resistance. The turning of these alloys has been done mainly by superhard tools like polycrystalline diamond (PCD). CVD diamond either as thin coatings on silicon nitride ceramics or as thick brazed tips on hard metals is alternative material. In this work, CVD diamond thin films were grown on Si3N4 ceramic substrates and thick CVD diamond plates were brazed onto WC-Co tools. These different inserts were used in dry turning of silicon-aluminium alloys with 12 wt% and 18 wt% Si. Both directly diamond coated and brazed tools are able to machine the Al-12 wt% Si alloy with negligible wear. In turning of Al-18 wt% Si, sharp edged tools yield lower cutting forces than the chamfered ones, with the occurrence of tool failure at about 500 and 100 m, respectively. CVD brazed tools proved to be able for dry turning this hypereutectic alloy, keeping the cutting forces below 60 N. Minimal wear was observed after 1500 m of cutting length, mainly caused by diamond chipping at the flank face.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Dry machining of silicon-aluminium alloys with CVD diamond brazed and directly coated Si3N4 ceramic tools


    Contributors:

    Published in:

    Vacuum ; 82 , 12 ; 1407-1410


    Publication date :

    2008


    Size :

    4 Seiten, 16 Quellen




    Type of media :

    Article (Journal)


    Type of material :

    Print


    Language :

    English




    CVD Diamond Coated Rotating Tools for Composite Machining

    Engdahl, Niels Chris | SAE Technical Papers | 2006


    Machining with ceramic tools

    Boggess,J. / Kennametal,US | Automotive engineering | 1984


    “Machining Aluminium Alloys”

    Emerald Group Publishing | 1989


    Electrochemical behavior of brazed aluminium alloys used in automotive heater cores

    Tierce,S. / Casenave,C. / Robidou,H. et al. | Automotive engineering | 2006


    Machining wrought aluminium alloys

    Mueller-Hummel, P. / Berky, E. / Schulze, R. et al. | British Library Conference Proceedings | 1998