The adhesion test under the conditions of different wheel/rail contacts, such as various speeds, axle-loads, contamination situation, was carried out. In order to simulate track irregularities, the rollers of the test rig were excited with hydraulic system in the test. The test results showed that the adhesion coefficient of wheel/rail decreased with increasing in the axle-load and running speed under the water contaminated condition. Also it was found that the adhesion coefficient dropped as an increase in the excitation frequency under the water contaminated condition. By modifying Kalker's FASTSIM program, the numerical simulation for wheel/rail adhesion was also carried out. The results obtained were in good agreement with the test results. Based on the obtained test and simulation results, correlations between wheel/rail adhesion and locomotive traction power have been discussed.
Wheel/rail adhesion and analysis by using full scale roller rig
Analyse der Rad-Schiene-Adhäsion mit einem Prüfstand im Originalmaßstab
2002
7 Seiten, 16 Bilder, 1 Tabelle, 7 Quellen
Conference paper
English
Wheel/rail adhesion and analysis by using full scale roller rig
British Library Conference Proceedings | 2000
|Wheel-Rail Adhesion Test Based on Full Scale Roller Rig
ASCE | 2020
|Wheel-Rail Adhesion Test Based on Full Scale Roller Rig
TIBKAT | 2021
|Strategies to simulate wheel–rail adhesion in degraded conditions using a roller-rig
Taylor & Francis Verlag | 2015
|Strategies to simulate wheel–rail adhesion in degraded conditions using a roller-rig
Tema Archive | 2015
|