The traditional method for assessing fatigue damage of ship structures assumes moderate wave amplitudes and linear responses. This method can be questioned when applied to container ships which are characterised by large deck openings that cause low torsion rigidity of the structure. Depending on the heading of the vessel in relation to the wave encounter direction, container ships can therefore be sensitive to, for example, oblique waves. In the current investigation, SESAM software with the three-dimensional hydrodynamic code WASIM is used to simulate a 4400 TEU container ship operating in the North Atlantic. Non-linear wave loads are utilised for the direct calculation of stress histories under severe sea states using the finite element software in SESAM. A method for the separation of normal stress components in an arbitrary cross section and location of the ship is proposed: warping stress from wave-induced torsion and stress components from horizontal and vertical bending. The strain (stress) response calculated using the models in one location is verified against full-scale measurements made on a similar type of container vessel in the same location. A case study is presented for fatigue damage assessment in two cross sections of the container ship. The contributions to fatigue damage from wave-induced torsion and horizontal and vertical bending are calculated and presented in a fatigue damage routing tool by means of polar diagrams, which includes the effects of heading and ship speed on fatigue damage.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Fatigue routing of container ships–assessment of contributions to fatigue damage from wave-induced torsion and horizontal and vertical bending


    Contributors:

    Published in:

    Publication date :

    2012-06-01


    Size :

    13 pages




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    Unknown





    A Shakedown Fatigue Model Tested in Torsion-Bending

    Cruz, Ivan / Zouain, Nestor | SAE Technical Papers | 2001


    Biaxial torsion-bending fatigue of SAE axle shafts

    Bonnen,J.J. / Conle,F.A. / Chu,C.C. et al. | Automotive engineering | 1991


    Biaxial Torsion-Bending Fatigue of SAE Axle Shafts

    Chu, C.-C. / Conle, F.A. / Bonnen, J.J.F. | SAE Technical Papers | 1991


    Fatigue Damage Initiation and Propagation in Al – 7075 under Combined Bending and Torsion Loading

    Singh, Abhay K. / Datta, Siddhant / Chattopadhyay, Aditi et al. | AIAA | 2019