Stringent emissions and fuel economy regulations motivate the investigation of advanced combustion strategies such as premixed charge compression ignition. However, controlling premixed charge compression ignition is challenging as there is no direct trigger for the combustion event. In addition, fuel-flexible applications must account for the impact of variable fuel properties on the premixed combustion proces. This paper identifies the control challenges in fuel-flexible premixed charge compression ignition and presents a control strategy for mitigating the differences in combustion phasing, the increases in nitrogen oxide emissions, and the decreases in power output typically encountered when operating with biodiesel in premixed operating conditions. When biodiesel is used in premixed operating conditions with the engine operating with the stock calibration for diesel fuel, the timing of the start of combustion and the peak heat release can shift by over 2° crank angle and 4° crank angle respectively, the nitrogen oxide emissions can increase by over 100%, and the torque output can drop by over 30% with respect to the engine performance with diesel. The control techniques presented in this paper use a biodiesel estimation method in conjunction with a physics-based accommodation strategy based on accounting for the differences between the fuel energy densities and the oxygen contents of diesel and biodiesel. This control method dictates fueling quantities on an energy basis instead of the traditional mass basis and maintains a nearly constant in-cylinder oxygen fraction for both diesel and biodiesel. At the premixed operating points considered in this study, this strategy is demonstrated to eliminate increases in the biodiesel nitrogen oxide emissions, decreases in the torque, and shifts in the combustion timing. The results demonstrate, first, that combustion timing control and nitrogen oxide emissions control can also be achieved through control of the in-cylinder oxygen fraction alone and, second, that energy-based fueling provides consistent in-cylinder oxygen fractions for diesel and biodiesel while also matching the torque outputs for the two fuels when considered at the same premixed operating point (the same speed, intake manifold temperature, charge flow, effective compression ratio, and combustion timing).


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Closed-loop combustion control of biodiesel–diesel blends in premixed operating conditions enabled via high exhaust gas recirculation rates


    Contributors:


    Publication date :

    2013-07-01


    Size :

    20 pages




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    English






    Combined Effect of Exhaust Gas Recirculation and Partially Premixed Charge on Diesel Combustion Behavior

    Ficarella, A. / Carlucci, A. P. / Laforgia, D. et al. | SAE Technical Papers | 2005


    Behavior of diesel combustion and exhaust emission with neat diesel fuel and diesel-biodiesel blends

    Nabi,M.N. / Shahadat,M.M. / Rahman,M.S. et al. | Automotive engineering | 2004


    Butanol-Diesel Blends for Partially Premixed Combustion

    Johansson, B.H. / Leermakers, C.A.J. / Somers, L.M.T. et al. | SAE Technical Papers | 2013