An experimental investigation of the effects of varying flapping kinematics on the mean lift produced by an insect-like flapping wing in hover is presented. This was performed with application to flapping-wing micro-air vehicles (FMAVs) in mind. Experiments were accomplished with a first-of-its-kind mechanical flapping-wing apparatus capable of reproducing a wide range of insect-like wing motions in air on the FMAV scale (~150 mm wingspan). This apparatus gives an insect-like wing the three controllable degrees of freedom required to produce the three separate motions necessary for mimicking an insect-like flapping-wing trajectory: sweeping (side to side), plunging (up and down), and pitching (angle of attack variation). Lift was measured via a force balance while the following kinematic parameters were varied: flapping frequency (f ), angle of attack at mid-stroke (αmid), timing of pitch reversal with stroke reversal (rotation phase), stroke amplitude (Φ), and plunge amplitude (Θ). Results revealed that mean lift scaled with f 1.5 and varied proportionally with Φ. A pitch reversal advanced by up to 5 per cent of the flapping period relative to stroke reversal was found to maximize mean lift, and delayed pitch reversals were detrimental to mean lift. Of the parameters tested, mean lift was also maximized for αmid = 45° and Θ = 8.6°.
Effect of flapping kinematics on the mean lift of an insect-like flapping wing
2011-07-01
14 pages
Article (Journal)
Electronic Resource
English
Effect of flapping kinematics on the mean lift of an insect-like flapping wing
Online Contents | 2011
|Biomimetic Analysis of Insect Wing Kinematics for Flapping MAVs
SAGE Publications | 2011
|Rigid-Body Kinematics Versus Flapping Kinematics of a Flapping Wing Micro Air Vehicle
Online Contents | 2015
|