A small-scale laboratory apparatus was built to study liquid friction modifier (LFM) behavior in a top-of-rail application. A field experiment was also carried out to complement the laboratory findings. KELTRACK® (a water-based LFM) was used as the test fluid. Laser-induced fluorescence served to measure the LFM thickness left on the track after the passage of the wheel. The lab experiments show that the LFM cannot withstand the high wheel-rail contact pressure in the nip present in cargo rail situations. As a result, the liquid is squeezed out laterally and attaches to the edges of the wheel contact band. This “edge liquid” is then carried down the track on the wheel. Gravimetric measurements of the wheel contact band confirm this observation, and show that only a minute amount of liquid is carried through the nip in the valleys between surface roughness features. In the field experiment, the LFM is applied from a trackside unit on a tangent section of the track. About 500 m downstream of the application point, the track has a curved section. LFM cannot be detected anywhere on the track a short distance (∼200 m) past the application unit. However, LFM is detectable on the curved sections of the track up to approximately 2 km from the application unit. This LFM on the curved track is believed to be due to transfer of the “edge liquid” from the wheel to the track, caused by the movement of the contact band as the train rounds a curve. The presence of LFM on the curved track far downstream is consistent with prior measurements of reduced lateral force on the curved track downstream of LFM application sites.


    Access

    Download


    Export, share and cite



    Title :

    Carrydown of liquid friction modifier


    Contributors:


    Publication date :

    2022-10-01


    Size :

    11 pages




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    English




    Simulated fuel dilution and friction-modifier effects on piston ring friction

    Smith, O. / Priest, M. / Taylor, R.I. et al. | Tema Archive | 2006


    Thick boundary film formation by friction modifier additives

    Anghel,V. / Spikes,H.A. / Bovington,C. et al. | Automotive engineering | 1998


    A method to apply friction modifier in railway system

    Matsumoto, Kosuke / Suda, Yoshihiro / Iwasa, Takashi et al. | Tema Archive | 2004


    The performance of a gasoline friction modifier fuel additive

    Hayden,T.E. / Ropes,C.A. / Rawdon,M.G. et al. | Automotive engineering | 2001


    The Performance of a Gasoline Friction Modifier Fuel Additive

    Ropes, Charles A. / Rawdon, Michael G. / Hayden, Thomas E. | SAE Technical Papers | 2001