For scavenging the combustion chamber during the gas exchange, a temporary positive pressure gradient between the intake and the exhaust is required. On a single-scroll turbocharged four cylinder engine, the positive pressure gradient is not realized by the spatial separation of the exhaust manifold (twin-scroll), but by the use of suitable short exhaust valve opening times. In order to avoid any influence of the following firing cylinder onto the ongoing scavenging process, the valve opening time has to be shorter than 180 °CA. Such a short valve opening time has both, a strong influence on the gas exchange at the low-end torque and at the maximum engine power. This paper analyzes a phenomenon, which occurs due to short exhaust valve opening durations and late valve timings: A repeated compression of the burned cylinder charge after the bottom dead center, referred to as “recompression” in this paper. By means of a new energetic analysis (available technical work capacity) the energetic contribution of the recompression to the boost pressure generation has been examined and is presented in this paper. Furthermore two different variable exhaust valve train systems in combination with a part-scroll-separation exhaust manifold are compared in this paper. The aim is to reduce fuel consumption at the nominal power. The two exhaust valve train systems increase the valve opening duration by either a two step system or by a system with the ability to offset the valve timing. It is shown in simulation results how both systems in combination with a prolonged part-scroll-separation in the exhaust manifold reach a potential to reduce fuel consumption up to 10 %.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Investigation of the Gas Exchange (Scavenging) on a Single-Scroll Turbocharged Four Cylinder GDI Engine


    Additional title:

    Sae Technical Papers


    Contributors:

    Conference:

    SAE 2016 World Congress and Exhibition ; 2016



    Publication date :

    2016-04-05




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English




    Scavenging in a turbocharged gasoline engine

    Karnik,A.Y. / Jankovic,M.J. / Shelby,M.H. et al. | Automotive engineering | 2012



    The Ford 1.8L Four Cylinder Turbocharged Diesel Engine for Passenger Car Application

    Lawrence, R. J. / Evans, R. W. | SAE Technical Papers | 1990


    Experimental Investigation of Six Cylinder Turbocharged Di-Diesel Engine Cold Startability

    B, Dinesh Kumar / Murugesan, Leelakumar / Nagarajan, M et al. | SAE Technical Papers | 2014


    Anti-bounce engine mount and its application to a four cylinder turbocharged diesel engine

    Ferrand,M. / Vilain,C. / Peugeot,FR | Automotive engineering | 1991